Product Manual

0044-0391-0M Rev A y solo Digital Clinical Scale

INSTALLATION, CONT.

Assembly, Cont.

Step 2

1. Align Part 3 (lower outside column) with assembled Part 1 and 2 (display upper

outside and inside column, and lower inside column).

2. Press the locking tab (on Part 2, lower inside column) inward and then insert into

Part 3 (lower outside column).

3. Slide the cable connector through Part 3 (lower outside column).

4. Press Part 3 and Part (1 and 2) together until the locking tab snaps in place.

5. Ensure that the locking tab is locked securely.

6. Install the (2) M3 x 12 machine screws (one in each side of Part 3) to secure Part 1

and 2 together with Part 3.

Ensure locking tab

is securely locked.

Press locking tab

inward to insert

Part 2 into Part 3.

Slide the cable

connector

through Part 3.

Install (1) M3 x 12

screw on each

side of Part 3.