Owner`s manual

2
DISPLAY ANNUNCIATORS
The annunciators are turned on to indicate that the scale display is in the mode corresponding to
the annunciator label or that the status indicated by the label is active.
O
The O annunciator is turned on when the weight display is stable.
lb oz
Both the lb and oz annunciators are turned on to indicate that the displayed weight is in pounds
and ounces.
g
The g annunciator is turned on to indicate that the displayed weight is in grams.
KEY FUNCTIONS
UNITS
1. Press to change the weighing units to the alternate units of measurement.
2. Press for 3 seconds to enter calibration mode.
ZERO
1. Press to reset the display to zero up to 100% of the scale capacity.
ON/OFF
1. Press and release to turn on scale.
2. Press and release to turn the scale off.