Owner`s manual

8528-M303-O1 PS-7
Page 2
DISPLAY ANNUNCIATORS
The annunciators are turned on to indicate that the scale display is in the mode corresponding to
the annunciator label or that the status indicated by the label is active.
O
The O annunciator is turned on when the weight display is stable.
lb
The lb annunciator is turned on to indicate that the displayed weight is in pounds.
oz
The oz annunciator is turned on to indicate that the displayed weight is in ounces.
lb oz
Both the lb and oz annunciators are turned on to indicate that the displayed weight is in pounds
and ounces.
oz 1/8
The oz 1/8 annunciator is turned on to indicate that the displayed weight is in 1/8 ounce.
g
The g annunciator is turned on to indicate that the displayed weight is in grams.
"732< (Low Battery)
When the rechargeable battery pack is near the point it needs to be recharged, a low battery
indicator on the display will turn on. If the battery voltage drops too low for accurate weighing,
the scale will automatically shut off and you will be unable to turn it back on. When the low
battery indicator is displayed, the operator should plug-in the 15VDC adapter.
KEY FUNCTIONS
UNITS
1. Press to change the weighing units to the alternate units of measurement (if
selected during configuration of the scale).
2. Press to select menu in the Configuration mode.
ZERO
1. Press to reset the display to zero up to 100% of the scale capacity.
2. Press and hold for 3 seconds to enter Configuration mode.
3. Press to confirm the setting for each menu.
ON/OFF
1. Press and release to turn on scale.
2. Press and release to turn the scale off.
3. Press to confirm setting in Gravity Compensation mode.