Product Manual

0044-0392-0M Rev A 09/15
Assembly, Cont.
Operation
1. Position upper and lowers Stabilizers on the
Column and place PHR against the wall.
2. Raise Headpiece well above estimated height
of patient.
3. Assist patient onto PHR Base (or scale). Note
that patient should stand straight up with their
back should slightly touching ruler.
4. Pull headpiece down to patient’s head and
read height. Height is read at red arrows on
headpiece.
203 E. Daugherty, Webb City, MO 64870 USA
PH: 417-673-4631  FX: 417-673-2153
www.detecto.com
 Install (1) Stabilizer on Column
Piece “C” and insert into Headpiece
as shown below.
 Insert Column Piece marked “C”
into Column Piece “B-C” and press
down to lock in place.
Assembly is complete. The PHR
Portable Height Rod is ready to use.
Headpiece installed for
use without scale.
Headpiece installed for
use wit h scale.
Upper
Stabilizer
Lower
Stabilizer
Headpiece