Product Manual

EUSN (Domain and user name for WiFi Enterprise mode): Sets the login user name to be

used for WiFi Enterprise. The parameter takes effect following a power cycle only. A change

to this parameter during operation does not affect the current connection.

EPSW (Password for WiFi Enterprise mode): Sets the password to be used for WiFi

Enterprise. This parameter takes effect following a power cycle only. A change to this

parameter does not affect the current connection.

WLSI (Wireless LAN Service Set Identifier ‘SSID’): Sets the destination Wireless LAN SSID

string. This parameter is required for communications with a specific WLAN access point and

must be configured with the exact SSID of the access point you wish to connect to. A list of

available access points and ad-hoc networks can be seen on the webpage just below this

prompt. In order to set the MedVue to act as an access point, the SSID must be entered as

“!MedVue” with the exclamation point telling the weight analyzer that it will be an access point.

DIP (Default IP address): This will set the option card’s default IP address. This should

default to the IP address “192.168.0.100”, but can be changed to any appropriate address

when connecting to an existing network. To use DHCP automatic addressing, this parameter

must be set to “0.0.0.0”. It is not recommended to set the weight analyzer to DHCP as it could

make locating the weight analyzer on the network difficult.

SNET (Subnet mask): Sets the subnet IP mask for the LAN connection. If this parameter is

set to “0.0.0.0” it will attempt to calculate the appropriate subnet mask on the next power cycle

if the option card is set with a static IP address (see DIP above). If set to connect via DHCP,

the subnet mask will be resolved when attempting to connect to the DHCP server.

IPG (IP gateway): Sets the IP Gateway used by the MedVue. The weight analyzer will

attempt to resolve the IP gateway by DHCP, but only if the DIP parameter is set to empty

(0.0.0.0).

Dialup/Cellular: These settings are not used by the MedVue WiFi option and can be ignored.

8555-M519-O1  MedVue MVWIFI Operation