Product Manual

The following is a description of the parameters and appropriate settings:

WLCH (Wireless LAN channel): This sets the default WiFi communication channel. When

the MedVue is set to operate in Ad-Hoc mode, this parameter must be given a value between

1-13 that defines the channel to be used for beacon transmission. When set to connect to an

existing network, the MedVue WiFi option will adopt that network’s channel.

WST0 (Wireless LAN security type): This sets the wireless LAN security type for the SSID

that the weight analyzer is to connect to, and does not apply for Ad-Hoc connection. Following

are descriptions of valid inputs into this field and what type of security they represent:

0 = no security

1 = WEP 64

2 = WEP 128

3 = WPA-PSK with TKIP encryption

4 = WPA2-PSK with TKIP or AES encryption

7 = EAP-MD5 and static WEP64

8 = EAP-MD5 and static WEP128

105 = WPA-TKIP Enterprise with EAP-TLS or PEAP-MSCHAPv2. RADIUS Certification

Verification will be skipped.

106 = WPA2-AES Enterprise with EAP-TLS or PEAP-MSCHAPv2. RADIUS

Certification Verification will be skipped.

WLK1 (Wireless LAN WEP Key): Sets the Wireless LAN WEP key. Key must be a

hexadecimal representation string where each byte is described by 2 ASCII characters in the

range [‘0’..’9’], [‘A’..’F’] or [‘a’..’f’]. When using 64-bit WEP key may contain up to 10 characters

(defining 5 bytes). When using 128-bit WEP, key may contain up to 26 characters (defining 13

bytes).

WLPP (Personal shared key pass-phrase): Sets the wireless LAN WPA-PSK pass-phrase.

When left empty, this WPA security will be disabled. If WLSI (SSID) is not empty, WPA-PSK

security is enabled for WiFi connections and the pass-phrase is used in generating the WPA-

PSK encryption key. The allowed value for this parameter is an ASCII string containing 8-63

characters.

8555-M519-O1  MedVue MVWIFI Operation