Product Manual

NETWORK CONFIGURATION
From the initial factory settings, the MedVue WiFi option will appear as a wireless access point
with the name “MedVue”. In order to connect to the weight analyzer, you can either connect to
it as an access point and then open a TCP/IP connection to the weight analyzer, or you can
set the WiFi option to connect to an existing network and then make a TCP/IP connection to it.
In order to set up the MedVue WiFi option to connect to an existing network, you will first need
to connect to it as an access point from a device able to make wireless connections and that
can run a web browser. Once your wireless device (i.e. a laptop or smart phone) has connect
to the “MedVue” access point, navigate to the following address using a web browser in order
to set up the appropriate network configuration settings.
http://192.168.0.100/iChip
If your attempt to browse to this page is successful, you will be presented with a password
screen in order to change the network configuration settings.
Enter “detecto” as the password and click on the “Submit” button.
You should then be presented with a new page which contains a form that can be used to set
up the network configuration to either connect to an existing network, or act as a wireless
access point.
The following is an image of how this screen will appear as well as functional descriptions of
each of the settings.
8555-M519-O1  MedVue MVWIFI Operation
4