Owner's manual

9200-0305-0M Rev B  LSM Series
2
Specifications
LSM2018-MWC225P
 Type: Tandem axle
 Capacity: 20,000 lb x 5 lb
 Overall Dimensions: 18 ft. 5 in. L x 7 ft. 4 in. W x 8 ft. 2 in. H
(not including tongue)
LSM1513-MWC225P
 Type: Single axle
 Capacity: 15,000 lb x 5 lb
 Overall Dimensions: 13 ft. L x 7 ft. 4 in. W x 8 ft. 2 in.
H (not including tongue)
Includes:
225 weight indicator, CTP-1 ticket printer, and 12-volt battery
Indicator Display:
240 x 64 pixel (5 in W x 1.33 in H / 127 mm W x 34 mm H) monochrome graphics LCD with
white LED backlight and visible in direct sunlight
Keypad:
60 key color-coded keypad with QWERTY keys plus four soft keys and 13 function keys
Printer:
Cardinal Scale model CTP-1 dot matrix ticket printer included in mobile weigh center for
NTEP legal-for-trade ticket printing of transactions
Inclinometer:
Included with scale and detects scale angle to determine if angle is out of acceptable
tolerance for weighing (blanks out if out of NTEP tolerance)
Tilt Angle:
Up to 5% in any direction (maximum allowed by NTEP)
Paint:
UV-protected, baked-on tan powder paint
Flooring:
High-quality rubberized non-slip composite flooring with predefined floor plank seams in the
scale deck help prevent debris from piling up inside and to help with cleaning
Country of Origin:
USA
NTEP Certificate of
Conformance:
Certificate number 16-042 (legal for trade)
Accuracy Class:
III / IIIL
Power
Requirements:
12V automotive type battery (battery included)
Deck Height:
6 inches when in weigh mode for easy step-in
Air Pump:
Integral air pump to lift and lower trailer air bag suspension
Load Cells:
NTEP stainless steel model ZX-10000 tension load cells
Gates:
Two swing gates included with customer's choice of gate opening hinge pin locations.
Brakes:
Electric brakes (4)
Shipping Weights:
LSM2018-MWC225P: 6,000 lb; LSM1513-MWC225P: 4,200 lb