Owner`s manual

INTRODUCTION

Thank you for your purchase of our Detecto European Digital Scale, Waist-High Models

EU522 / EU522HR or Floor Model EU544. They were built with Detecto quality and reliability

at our factory in Webb City, Missouri, USA. This manual will guide you through installation,

and operation of your scale. Please read it thoroughly before attempting to operate this scale

and keep it handy for future reference.

any manner, is prohibited. No patent liability is assumed with respect to the use of the information contained

herein. While every precaution has been taken in the preparation of this manual, the Seller assumes no

responsibility for errors or omissions. Neither is any liability assumed for damages resulting from use of the

information contained herein. All instructions and diagrams have been checked for accuracy and ease of

application; however, success and safety in working with tools depend to a great extent upon the individual

accuracy, skill and caution. For this reason the Seller is not able to guarantee the result of any procedure

contained herein. Nor can they assume responsibility for any damage to property or injury to persons occasioned

from the procedures. Persons engaging the procedures do so entirely at their own risk.

SPECIFICATIONS

Capacity: ….…..……..…… 200 kg x .1 kg

Platform Size: …….…..….. 280 mm x 335 mm

Dimensions: ….…..………. EU522 = 280 mm W x 490 mm D x 888 mm H

EU544 = 280 mm W x 515 mm D x 210 mm H

Power Requirements: …… 230 VAC 50 Hz powering a 12 VDC 300 mA wall plug-in power

supply OR Six (6) "C" size NICAD batteries, (not included)

Operating Temp: …………

-10 to +40 C

Shipping Weight: …..…..… 7.7 kg

PREPARATION

Unpacking Instructions

SCALE

Remove scale from carton by lifting up with equal force from column and platform base of

scale.

When removing scale from its packing, inspect it for signs of damage, such as exterior

dents and scratches. Keep carton and packing material for return shipment if it should

become necessary.

Remove all plastic wrapping, foam fillers and cardboard material from scale.

INDICATOR

Remove the indicator from shipping carton.

Inspect it for any evidence of damage (such as exterior dents or scratches) that may have

taken place during shipment.

Keep carton and packing material for return shipment if it should become necessary.

BATTERY INSTALLATION

If you wish to operate scale from batteries, you must first obtain and install batteries in the

indicator before proceeding.

Refer to the 758C Series Operation Manual, 8555-M433-O1, for battery installation

instructions.

PLUG-IN POWER SUPPLY

The power supply for the scale includes a "round pin attachment plug" adapter. If another

type of plug is required, it’s the responsibility of the customer to obtain correct power

adapter.