Product Manual

KEY FUNCTIONS
HOLD
1. Press HOLD key, the arrow in the left bottom flashes. When the loaded weight is
above 3.3 lb /1.5 kg and stable, the arrow stops flashing.
2. To disable the hold function, press HOLD key again, and the arrow disappears.
3. Press to confirm the setting for each menu.
lb/kg
1. Press to change the weighing units to the alternate units of measurement (if
selected during configuration of the scale).
2. Press to select menu in the CONFIGURATION mode.
ON-OFF / ZERO
1. Press and release to turn on scale.
2. Press and release to turn the scale off.
3. Press to reset the display to zero up to 20% of the scale capacity.
TARE
1. When there is load on the scale, press this key to return to zero.
2. 2. Press and hold for 3 seconds to enter Configuration mode.
DO NOT operate the keypad with pointed objects (pencils, pens, etc).
Damage to keypad resulting from this practice is NOT covered under warranty.
8525-M320-O1 Rev-B x DR660 Operation
4