User manual

2. CONTROLS & MODULES

2.1 DISPLAY PANEL

2.1.1 LED BAR GRAPH

This LED display at the top of the Control Panel indicates the detection intensity which is based on

the amount and composition of metallic objects passing through the unit.

2.1.2 READY LIGHT

This green light appears when power is turned on and the unit is ready to operate. The light will also

indicate when an individual inspection has been completed by the unit and it is ready to accept the

next person. Operators should make certain the green light is visible before any individual is permit-

ted to pass through the detector.

2.1.3 LCD PANEL

Large alpha/numeric LCD below the Bar Graph reports all operating, setup and diagnostic informa-

tion of the unit. Because the unit is designed to be “user-friendly,” all regulation and control functions

are self-prompting with necessary commands shown on the LCD display.

2.1.4 ALARM LIGHT

This red light appears when the unit detects a targeted amount of metal on an individual, according

to specifications of the Program and Sensitivity levels that have been selected. Operators should be

instructed to respond to all alarms. For any detector to be effective in a security system it is absolute-

ly necessary that the cause of EVERY ALARM be determined.

CS 5000

User Manual