Owner`s manual

8525-M178-O1 459-CH and 8432-CH
Page 5
#10-24 x 1/2”
CHILD SEAT INSTALLATION, Cont.
5. Align holes in gimbal with holes in scale
platform and attach to scale platform with four
1/4-20 x 1/2" screws.
6. Tighten screws with Philips screw driver.
7. After gimbal is installed, position child seat in
gimbal and attach with #10-24 x 1/2” screws
(two screws on each side).
8. Periodically re-check screws for
tightness.
9. Proceed to SETUP INSTRUCTIONS
for your particular scale model
1/4-20 x 1/2”