Owner`s manual

8525-M178-O1 459-CH and 8432-CH
Page 9
8432-CH OPERATING INSTRUCTIONS
Basic Weighing
1. Place scale on a level, stable surface.
2. With the child seat empty, press
ON/OFF key.
3. Press ZERO key to zero weight
display. ZERO, [\ (STABLE) and lb
or kg annunciators will turn on to show
that scale is ready for use.
4. Lay child being weighed in center of
seat. This will distribute the weight
evenly across scale platform.
5. Read weight display.
6. Remove child from seat.
Zero Weight Display
1. If weight display is not showing zero
weight, press ZERO key.
2. Weight display will return to zero.
ZERO, [\ (STABLE) and lb or kg
annunciators will turn on to show a
stable, center-of-zero weight condition.
Zero Weight Display with Item on Scale
1. Place item (blanket or similar covering) on scale.
2. Weight display will show weight of item on scale.
3. Press ZERO key.
4. Weight display will return to zero. ZERO, [\ (STABLE) and lb or kg annunciators will
turn on. The item’s weight has been "zeroed off".
5. Proceed with weighing operation.
Metric Conversion
Press UNITS key to toggle between pounds and kilograms. The lb or kg annunciator will
turn on to show which weighing unit is active.
DO NOT press the keys on the keypad with pointed objects (pencils, pens, etc).
Damage to the keypad resulting from this practice is NOT covered under warranty.
CAUTION!
Do not leave the child unattended in the child seat. Failure to
maintain continual control of the child can result in serious
injuries should the child fall from the child seat.
NOTE! The seat straps have been intentionally omitted!