Specifications

Surge
As what is concluded in the document from Note2 of clause 5.4.6.2 of ISO/IEC 17025: 2005[E], the
requirements for measurement uncertainty in Surge testing are deemed to have been satisfied, and the
testing is reported in accordance with the relevant Surge standards. The immunity test signal from the Surge
system meet the required specifications in IEC 61000-4-5 through the calibration report with the calibrated
uncertainty for the waveform of voltage and timing as being 1.58 % and 2.71%.
Conducted susceptibility
As what is concluded in the document from Note2 of clause 5.4.6.2 of ISO/IEC 17025: 2005[E], the
requirements for measurement uncertainty in CS testing are deemed to have been satisfied, and the testing
is reported in accordance with the relevant CS standards. The immunity test signal from the CS system
meet the required specifications in IEC 61000-4-6 through the calibration for unmodulated signal and
monitoring for the test level with the uncertainty evaluation report for the injected modulated signal level
through CDN and EM Clamp/Direct Injection as being 3.68 dB and 2.72 dB.
Power frequency magnetic field
As what is concluded in the document from Note2 of clause 5.4.6.2 of ISO/IEC 17025: 2005[E], the
requirements for measurement uncertainty in PFM testing are deemed to have been satisfied, and the
testing is reported in accordance with the relevant PFM standards. The immunity test signal from the PFM
system meet the required specifications in IEC 61000-4-8 through the calibration report with the calibrated
uncertainty for the Gauss Meter to verify the output level of magnetic field strength as being 1.8 %.
Voltage dips and interruption
As what is concluded in the document from Note2 of clause 5.4.6.2 of ISO/IEC 17025: 2005[E], the
requirements for measurement uncertainty in DIP testing are deemed to have been satisfied, and the testing
is reported in accordance with the relevant DIP standards. The immunity test signal from the DIP system
meet the required specifications in IEC 61000-4-11 through the calibration report with the calibrated
uncertainty for the waveform of voltage and timing as being 1.58 % and 2.72%.
A Test Lab Techno Corp.
Report Number: 1402CE13-01
7 of 153