Specifications

4.3.2. Test Instrument
Equipment Manufacturer Model Number Serial Number Cal. Date Remark
Power Harmonics
Analyzers
EMC-Partner AG HAR1000-1P 171 02/07/2014
(2)
Test Site ATL TE05 TE05 N.C.R.
-----
Remark:
(1)
Calibration period 1 year.
(2)
Calibration period 2 years.
NOTE: N.C.R. = No Calibration Request.
4.3.3. Setup
4.3.4. Test Procedure
The EUT was placed on the top of a wooden table 0.8 meters above the ground and the EUT is supplied
in series with power analyzer from a power source having the same normal voltage and frequency as
the rated supply voltage and the equipment under test. And the rated voltage at the supply voltage of
EUT of 0.94 times and 1.06 times shall be performed.
A definition of the normal load or of the conditions for adequate heat discharge can usually be found in
the EN publication corresponding to the equipment under test.
Equipment may have several separately controlled circuits. Each circuit is considered as a single piece
of equipment if it can be operated independently and separately from the other circuits.
A Test Lab Techno Corp.
Report Number: 1402CE13-01
35 of 153