Specifications

3 Test Methodology
3.1. Decision of Test Mode
The following test mode(s) were scanned during the preliminary test:
Pre-Test Mode
Mode 1: Normal Operation Mode
After the preliminary scan, the following test mode was found to produce the highest emission
level.
Final Test Mode
Conducted Emission Mode 1
Radiated Emission Mode 1
Harmonic current emissions Mode 1
Emission
Voltage fluctuations & flicker Mode 1
ESD Mode 1
RS Mode 1
EFT Mode 1
Surge Mode 1
CS Mode 1
PMF Mode 1
Immunity
Voltage dips & voltage variations Mode 1
Then, the above highest emission mode of the configuration of the EUT and cable was chosen for all
final test items.
3.2. EUT Exercise Software
1. Setup the EUT and simulators as shown on 3.3.
2. Turn on the power of all equipment.
3. The EUT will start to operate function.
A Test Lab Techno Corp.
Report Number: 1402CE13-01
13 of 153