Specifications

ManualsBrandsDetecto ManualsComputer equipment7045G

A Test Lab Techno Corp.

EMC Test Report

Product Type ： ICP DAS I-7 Series I/O Converter

Applicant ： ICP DAS CO., LTD.

Address ： No. 111, Kuangfu N. Rd., Hukon Shiang, Hsinchu, Taiwan 303, R.O.C

Trade Name ： ICP DAS

Model Number ： I-7520A

Test

Specification

： EN 55022: 2010 +AC:2011 / Class A

EN 55024: 2010

EN 61000-3-2: 2006 +A1:2009 + A2: 2009 / Class A

EN 61000-3-3: 2008

EN 61000-4-2:2009

EN 61000-4-3:2006 +A1:2008 +A2:2010

EN 61000-4-4:2012

EN 61000-4-5:2006

EN 61000-4-6:2009

EN 61000-4-8:2010

EN 61000-4-11:2004

Receive Date ： Jan. 29, 2014

Test Period ： Feb. 05 ~ Feb. 10, 2014

Issue Date ： Feb. 17, 2014

Issue by

A Test Lab Techno Corp.

No. 140-1, Changan Street, Bade City,

Taoyuan County 334, Taiwan R.O.C.

Tel：+886-3-2710188 / Fax：+886-3-2710190

aiwan Accreditation Foundation accreditation number: 1330

Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno

Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be

noted in the revision section of the document. The client should not use it to claim product endorsement by

TAF, or any government agencies. The test results in the report only apply to the tested sample.

Report Number: 1402CE13-01

1 of 153

Summary of content (153 pages)

PAGE 1
A Test Lab Techno Corp. Report Number: 1402CE13-01 EMC Test Report Product Type Applicant Address Trade Name Model Number Test Specification ：：：：：： Receive Date Test Period Issue Date ： Jan. 29, 2014 ： Feb. 05 ~ Feb. 10, 2014 ： Feb. 17, 2014 ICP DAS I-7 Series I/O Converter ICP DAS CO., LTD. No. 111, Kuangfu N. Rd., Hukon Shiang, Hsinchu, Taiwan 303, R.O.
PAGE 2
A Test Lab Techno Corp. Report Number: 1402CE13-01 Revision History Rev. Issue Date Revisions 00 Feb. 13, 2014 Initial Issue 01 Feb. 17, 2014 Revised report information. 2 of 153 Revised By Nina.
PAGE 3
A Test Lab Techno Corp. Report Number: 1402CE13-01 Ver i f i c a t i o n o f C o m p l i a n c e Issued Date: 02/17/2014 ICP DAS I-7 Series I/O Converter ICP DAS CO., LTD.
PAGE 4
A Test Lab Techno Corp. Report Number: 1402CE13-01 TABLE OF CONTENTS 1 General Information .........................................................................................................5 2 EUT Description................................................................................................................8 3 Test Methodology...........................................................................................................13 3.1. Decision of Test Mode ...........................
PAGE 5
A Test Lab Techno Corp. Report Number: 1402CE13-01 1 General Information 1.1.
PAGE 6
A Test Lab Techno Corp. Report Number: 1402CE13-01 1.2. Measurement Uncertainty Conducted Emission The measurement uncertainty is evaluated as ± 2.02 dB. Conducted Emissions (Telecommunication Ports) The measurement uncertainty is evaluated as ± 2.02 dB. Radiated Emission The Vertical measurement uncertainty of 30MHz - 1GHz is evaluated as ± 3.62 dB. The Horizontal measurement uncertainty of 30MHz - 1GHz is evaluated as ± 3.98 dB. The Vertical measurement uncertainty of 1GHz - 6GHz is evaluated as ± 3.
PAGE 7
A Test Lab Techno Corp. Report Number: 1402CE13-01 Surge As what is concluded in the document from Note2 of clause 5.4.6.2 of ISO/IEC 17025: 2005[E], the requirements for measurement uncertainty in Surge testing are deemed to have been satisfied, and the testing is reported in accordance with the relevant Surge standards.
PAGE 8
A Test Lab Techno Corp. Report Number: 1402CE13-01 2 EUT Description Product Type ： ICP DAS Trade Name ： ICP DAS Model Number ： I-7520A Applicant ： ICP DAS CO., LTD. No. 111, Kuangfu N. Rd., Hukon Shiang, Hsinchu, Taiwan 303, R.O.C Manufacturer ： ICP DAS CO., LTD. No. 111, Kuangfu N. Rd., Hukon Shiang, Hsinchu, Taiwan 303, R.O.C I-7 Series I/O Converter I/O Port Description： I/O Port Types Q’TY Test Description 1). LAN Port 1 Connected to PC 2). RS-232 Port 1 Connected to PC 3).
PAGE 9
A Test Lab Techno Corp. Report Number: 1402CE13-01 Feature of Equipment under Test： The model listed below is series model to I-7520A.
PAGE 10
A Test Lab Techno Corp.
PAGE 11
A Test Lab Techno Corp.
PAGE 12
A Test Lab Techno Corp.
PAGE 13
A Test Lab Techno Corp. Report Number: 1402CE13-01 3 Test Methodology 3.1. Decision of Test Mode The following test mode(s) were scanned during the preliminary test: Pre-Test Mode Mode 1: Normal Operation Mode After the preliminary scan, the following test mode was found to produce the highest emission level.
PAGE 14
A Test Lab Techno Corp. Report Number: 1402CE13-01 3.3. Configuration of Test System Mode 1 A E AC Input F I B D C (1) Monitor EUT PC EUT G (2) (3) Keyboard Mouse Signal Cable Type H Signal Cable Description A LAN Cable Shielded, 1.8m with one core B AC Power Cable Non-Shielded, 1.7m with one core C DC Power Cable Non-Shielded, 0.5m D RS-232 Cable Non-Shielded, 0.5m with one core E RS-232 Cable Shielded, 1.7m with two cores F USB Cable Shielded, 1.
PAGE 15
A Test Lab Techno Corp. Report Number: 1402CE13-01 Devices Description Product Manufacturer Model Number Serial Number Power Cord (1) Monitor DELL U2711 CN0H530T7426105K04 3L Non-Shielded, 1.8m (2) Keyboard HP SK-2880 BC3520FJ6X5310 Power by PC (3) Mouse DELL MOC5UO HOX06NVO Power by PC (4) PC ICP DAS VB-115H N/A Non-Shielded, 1.7m Diversity Mode 1 ※ PC Keypart information Main Software Universal PCI, Serial Communication Board with 4 RS-422/485 ports (RoHS).
PAGE 16
A Test Lab Techno Corp. Report Number: 1402CE13-01 3.4. Test Site Environment Items Test Item Temperature (°C) Required (IEC 60068-1) Actual 15-35 26.0 25-75 60.0 860-1060 950 15-35 26.0 25-75 60.0 860-1060 950 -- 26.0 -- 60.0 Barometric pressure (mbar) -- 950 Temperature (°C) -- 26.0 -- 60.0 -- 950 15-35 24.0 30-60 43.6 860-1060 950 -- 20.1 -- 54.2 -- 950 15-35 22.3 30-60 54.8 860-1060 950 15-35 24.0 10-75 52.1 860-1060 950 -- 24.0 -- 52.
PAGE 17
A Test Lab Techno Corp. Report Number: 1402CE13-01 4 Emission Test 4.1. Conducted Emission Measurement 4.1.1. Limit A.C. Mains Conducted Interference Limit： Class A Equipment (dBuV) Frequency (MHz) Note: Class B Equipment (dBuV) Quasi-peak Average Quasi-peak Average 0.15 - 0.5 79 66 66 - 56 56 - 46 0.50 - 5.0 73 60 56 46 5.0 - 30.0 73 60 60 50 (1) The lower limit shall apply at the transition frequencies.
PAGE 18
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.1.3. Test Setup A.C.
PAGE 19
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.1.4. Test Procedure The EUT and simulators are connected to the main power through a line impedance stabilization network (L.I.S.N.). This provides a 50 ohm /50uH coupling impedance for the measuring equipment. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination.
PAGE 20
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.1.5. Test Result Standard: EN 55022 Class A Line: L1 Test item: Conducted Emission Power: AC 230V/50Hz Model Number: I-7520A Temp.(℃)/Hum.(%RH): 26(℃)/60%RH Mode: Mode 1 Date: 2014/02/05 Test By: Frank Lin Description: No. Frequency QP AVG Correction QP AVG QP AVG QP AVG reading reading factor result result limit limit margin margin (MHz) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dBuV) (dBuV) (dB) (dB) 1 0.
PAGE 21
A Test Lab Techno Corp. Report Number: 1402CE13-01 Standard: EN 55022 Class A Line: N Test item: Conducted Emission Power: AC 230V/50Hz Model Number: I-7520A Temp.(℃)/Hum.(%RH): 26(℃)/60%RH Mode: Mode 1 Date: 2014/02/05 Test By: Frank Lin Description: No. Frequency QP AVG Correction QP AVG QP AVG QP AVG reading reading factor result result limit limit margin margin (MHz) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dBuV) (dBuV) (dB) (dB) 1 0.1500 52.51 20.84 9.
PAGE 22
A Test Lab Techno Corp. Report Number: 1402CE13-01 Standard: EN 55022 Class A Line: N/A Test item: Conducted Emission Power: AC 230V/50Hz Model Number: I-7520A Temp.(℃)/Hum.(%RH): 26(℃)/60%RH Mode: Mode 1 (ISN 10M) Date: 2014/02/05 Test By: Frank Lin Description: No. Frequency QP AVG Correction QP AVG QP AVG QP AVG reading reading factor result result limit limit margin margin (MHz) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dBuV) (dBuV) (dB) (dB) 1 0.2420 49.
PAGE 23
A Test Lab Techno Corp. Report Number: 1402CE13-01 Standard: EN 55022 Class A Line: N/A Test item: Conducted Emission Power: AC 230V/50Hz Model Number: I-7520A Temp.(℃)/Hum.(%RH): 26(℃)/60%RH Mode: Mode 1 (ISN 100M) Date: 2014/02/05 Test By: Frank Lin Description: No. Frequency QP AVG Correction QP AVG QP AVG QP AVG reading reading factor result result limit limit margin margin (MHz) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dBuV) (dBuV) (dB) (dB) 1 0.2420 49.
PAGE 24
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.1.6.
PAGE 25
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.2. Radiated Interference Measurement 4.2.1. Limit dBuV/m (Distance 10m) Frequency (MHz) Class A Class B 30 ~ 230 40 30 230 ~ 1000 47 37 NOTE: The lower limit shall apply at the transition frequencies. dBuV/m (Distance 3m) Frequency (MHz) Class A Class B Average Peak Average Peak 1000 ~ 3000 56 76 50 70 3000 ~ 6000 60 80 54 74 NOTE: The lower limit shall apply at the transition frequencies. 4.2.2.
PAGE 26
A Test Lab Techno Corp. Report Number: 1402CE13-01 3 Meter Chamber Equipment Manufacturer Model Number Serial Number Cal.
PAGE 27
A Test Lab Techno Corp. Report Number: 1402CE13-01 Above 1GHz 4.2.4. Test Procedure The EUT and its simulators are placed on a turn table which is 0.8 meter above ground. When the EUT is floor- standing equipment, it is placed on the ground plane which has a 15 cm non-conductive covering to insulate the EUT from the ground plane. The turn table can rotate 360 degrees to determine the position of the maximum emission level.
PAGE 28
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.2.5. Test Result Standard: EN 55022 Class A Test Distance: 10m Test item: Radiated Emission Power: AC 230V/50Hz Model Number: I-7520A Temp.(℃)/Hum.(%RH): 26(℃)/60%RH Mode: Mode 1 Date: 2014/02/05 Ant.Polar.: Horizontal Test By: Frank Lin No. Frequency Reading Correct Result Limit Margin Height Degree (MHz) (dBuV) Factor(dB/m) (dBuV/m) (dBuV/m) (dB) (cm) (°) 1 44.7433 41.82 -14.82 27.00 40.00 -13.
PAGE 29
A Test Lab Techno Corp. Report Number: 1402CE13-01 Standard: EN 55022 Class A Test Distance: 10m Test item: Radiated Emission Power: AC 230V/50Hz Model Number: I-7520A Temp.(℃)/Hum.(%RH): 26(℃)/60%RH Mode: Mode 1 Date: 2014/02/05 Ant.Polar.: Vertical Test By: Frank Lin No. Frequency Reading Correct Result Limit Margin Height Degree (MHz) (dBuV) Factor(dB/m) (dBuV/m) (dBuV/m) (dB) (cm) (°) 1 44.5868 46.17 -14.37 31.80 40.00 -8.20 100 355 QP 2 100.2286 54.
PAGE 30
A Test Lab Techno Corp. Report Number: 1402CE13-01 Standard: EN 55022 Class A Test Distance: 3m Test item: Radiated Emission Power: AC 230V/50Hz Model Number: I-7520A Temp.(℃)/Hum.(%RH): 26(℃)/60%RH Mode: Mode 1 (1GHz~6GHz) Date: 2014/02/05 Ant.Polar.: Horizontal Test By: Frank Lin No. Frequency Reading Correct Result Limit Margin (MHz) (dBuV) Factor(dB/m) (dBuV/m) (dBuV/m) (dB) 1 1355.000 58.10 -1.90 56.20 76.00 -19.80 peak 2 1355.000 51.43 -1.90 49.53 56.
PAGE 31
A Test Lab Techno Corp. Report Number: 1402CE13-01 Standard: EN 55022 Class A Test Distance: 3m Test item: Radiated Emission Power: AC 230V/50Hz Model Number: I-7520A Temp.(℃)/Hum.(%RH): 26(℃)/60%RH Mode: Mode 1 (1GHz~6GHz) Date: 2014/02/05 Ant.Polar.: Vertical Test By: Frank Lin No. Frequency Reading Correct Result Limit Margin (MHz) (dBuV) Factor(dB/m) (dBuV/m) (dBuV/m) (dB) 1 1355.000 58.60 -1.90 56.70 76.00 -19.30 peak 2 1355.000 47.61 -1.90 45.71 56.
PAGE 32
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.2.6.
PAGE 33
A Test Lab Techno Corp.
PAGE 34
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.3. Harmonics Current Measurement 4.3.1. Limit Limits of Class A Harmonics Currents Harmonics Order Maximum Permissible harmonic current Harmonics Order Maximum Permissible harmonic current n (A) n (A) 3 2.30 2 1.08 5 1.14 4 0.43 7 0.77 6 0.30 9 0.40 8 ≤ n ≤ 40 0.23 * 8/n 11 0.33 Odd harmonics Even harmonics 13 0.21 15 ≤ n ≤ 39 0.
PAGE 35
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.3.2. Test Instrument Equipment Manufacturer Model Number Serial Number Cal. Date Remark Power Harmonics Analyzers EMC-Partner AG HAR1000-1P 171 02/07/2014 (2) Test Site ATL TE05 TE05 N.C.R. ----- Remark: (1) Calibration period 1 year. (2) Calibration period 2 years. NOTE: N.C.R. = No Calibration Request. 4.3.3. Setup 4.3.4. Test Procedure The EUT was placed on the top of a wooden table 0.
PAGE 36
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.3.5. Test Result Model Number I-7520A Test Item Power Harmonics Test Mode Mode 1 Date of Test 2014/02/07 Test Result: Pass Test Site TE05 Source qualification: Normal Current & voltage waveforms Harmonics and Class A limit line European Limits Note 1: For the following categories of equipment limits are not specified in this edition of the standard. -Equipment with a rated power of 75 W or less, other than lighting equipment.
PAGE 37
A Test Lab Techno Corp. Report Number: 1402CE13-01 Urms = Irms = P = THDi = 229.7V 0.256A 40.08W 61.0 % Test - Time : Freq = Ipk = S = THDu = 49.987 0.516A 58.77VA 0.10 % Range: cf = pf = Class A 1A 2.015 0.682 3min ( 100 %) Test completed, Result: PASSED Order 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Freq.
PAGE 38
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.3.6.
PAGE 39
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.4. Voltage Fluctuation and Flicker 4.4.1. Limit The following limits apply: -- the value of Pst shall not be greater than 1.0; -- the value of Plt shall not be greater than 0.65; -- the value of d(t) during a voltage change shall not exceed 3.3 ％ for more than 500 ms; -- the relative steady-state voltage change, dc, shall not exceed 3.
PAGE 40
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.4.3. Setup 4.4.4. Test Procedure The EUT is supplied in series with power analyzer from a power source having the same normal voltage and frequency as the rated supply voltage and the equipment under test. And the rated voltage at the supply voltage of EUT of 0.94 times and 1.06 times shall be performed. The EUT was placed on the top of a wooden table 0.
PAGE 41
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.4.5. Test Result Model Number I-7520A Test Item Flicker Test Mode Mode 1 Date of Test 2014/02/07 Test Site Test Result: Pass Status: Test Completed Plt and limit line Urms = Irms = P = 229.7V 0.254A 38.26W Freq = Ipk = S = 49.987 0.531A 58.44VA Test - Time : 1 x 10min = 10min ( 100 %) LIN (Line Impedance Network) : Limits : Plt : dmax : dtLim: 0.65 4.00 % 3.30 % Range: cf = pf = 1A 2.086 0.655 L: 0.24ohm +j0.15ohm N: 0.16ohm +j0.
PAGE 42
A Test Lab Techno Corp. Report Number: 1402CE13-01 4.4.6.
PAGE 43
A Test Lab Techno Corp. Report Number: 1402CE13-01 5 Immunity Test 5.1. Electrostatic Discharge (ESD) 5.1.1. Test Specification EN 61000-4-2 Environmental Phenomena Units Test Specification Performance Criterion Enclosure Port Electrostatic Discharge ±8 Air Discharge kV (Charge Voltage) B ±4 Contact Discharge 5.1.2. Test Instrument Equipment Manufacturer Model Number Serial Number Cal. Date Remark Discharge Gun Noiseken ESS-2002 ESS05Y4736 03/14/2013 (1) 0.
PAGE 44
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.1.4. Test Procedure The discharges shall be applied in two ways: a) Contact discharges to the conductive surfaces and coupling planes: The EUT shall be exposed to at least 200 discharges, 100 each at negative and positive polarity, at a minimum of four test points. One of the test points shall be subjected to at least 50 indirect discharges to the center of the front edge of the Horizontal Coupling Plane (HCP).
PAGE 45
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.1.5.
PAGE 46
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.1.6.
PAGE 47
A Test Lab Techno Corp.
PAGE 48
A Test Lab Techno Corp.
PAGE 49
A Test Lab Techno Corp.
PAGE 50
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.2. Radiated Electromagnetic Field (RS) 5.2.1. Test Specification EN 61000-4-3 Environmental Phenomena Units Test Specification MHz 80-1000 V/m(Un-modulated, rms) 3 % AM (1kHz) 80 Performance Criterion Enclosure Port Test Frequency Range RF Electromagnetic Field Amplitude Modulated A EUT tested in accordance with the specifications given by the standard of EN 61000-4-3. Step : 1% Step time : 3 Second 5.2.2.
PAGE 51
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.2.3. Setup 5.2.4. Test Procedure The test procedure was in accordance with EN 61000-4-3 a) The testing was performed in a fully anechoic chamber. The transmit antenna was located at a distance of 3 meters from the EUT. b) The frequency range is swept from 80 MHz to 1000 MHz, with the signal 80% amplitude modulated with a 1kHz sine-wave. The rate of sweep did not exceed 1.
PAGE 52
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.2.5.
PAGE 53
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.2.6.
PAGE 54
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.3. Electrical Fast Transient/Burst (EFT) 5.3.1. Test Specification EN 61000-4-4 Item Environmental Phenomena Units Test Specification Performance Criterion kV (Peak) Tr/Th ns Rep. Frequency kHz +0.5 5/50 5 B kV (Peak) Tr/Th ns Rep. Frequency kHz +0.5 5/50 5 B kV (Peak) Tr/Th ns Rep.
PAGE 55
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.3.4. Test Procedure a) Both positive and negative polarity discharges were applied. b) The length of the “hot wire＂ from the coaxial output of the EFT generator to the terminals on the EUT should not exceed 1 meter. c) The duration time of each test sequential was 1 minute. d) The transient/burst waveform was in accordance with EN 61000-4-4, 5/50ns. 5.3.5.
PAGE 56
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.3.6.
PAGE 57
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.4. Surge 5.4.1. Test Specification EN 61000-4-5 Item Environmental Phenomena Units Test Specification Performance Criterion Tr/Th us kV 1.2/50 (8/20) ±1 B Tr/Th us kV 1.2/50 (8/20) ± 0.5 B Tr/Th us kV kV 1.2/50 (8/20) ±1 ±2 B Signal Ports and Telecommunication Ports(See 1) and 2) ) Surges Line to Ground Input DC Power Ports Surges Line to Ground Input AC Power Ports Surges Line to Line Line to Ground 5.4.2.
PAGE 58
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.4.4. Test Procedure a) For EUT power supply: The surge is applied to the EUT power supply terminals via the capacitive coupling network. Decoupling networks are required in order to avoid possible adverse effects on equipment not under test that may be powered by the same lines, and to provide sufficient decoupling impedance to the surge wave. The power cord between the EUT and the coupling/decoupling networks was shorter than 2 meters in length.
PAGE 59
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.4.5.
PAGE 60
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.4.6.
PAGE 61
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.5. Conducted Susceptibility (CS) 5.5.1. Test Specification EN 61000-4-6 Environmental Phenomena Units Test Specification MHz 0.15-80 V (rms, Un-modulated) 3 % AM (1kHz) 80 MHz 0.15-80 V (rms, Un-modulated) 3 % AM (1kHz) 80 MHz 0.
PAGE 62
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.5.3.
PAGE 63
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.5.4. Test Procedure The EUT shall be tested within its intended operating and climatic conditions. The test shell performed with the test generator connected to each of the coupling and decoupling devices in turn, while the other non-excited RF input ports of the coupling devices are terminated by a 50-ohm load resistor.
PAGE 64
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.5.6.
PAGE 65
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.6. Power Frequency Magnetic Field (PMF) 5.6.1. Test Specification EN 61000-4-8 Environmental Phenomena Units Test Specification Performance Criterion Power-Frequency Magnetic Field Hz A/m (r.m.s.) 50 1 A Item Enclosure Port EUT tested in accordance with the specifications given by the standard of EN 61000-4-8. Orientation : X, Y, Z Test time : 180 Second 5.6.2. Test Instrument Equipment Manufacturer Model Number Serial Number Cal.
PAGE 66
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.6.4. Test Procedure a). The equipment was configured and connected to satisfy its functional requirements. It shall be placed on the GRP with the interposition of a 0.1m-thick insulating support. b). The equipment cabinets shall be connected to the safety earth directly on the GRP via the earth terminal of the EUT. c). The power supply, input and output circuits shall be connected to the sources of power supply, control and signal. d).
PAGE 67
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.6.6.
PAGE 68
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.7. Voltage Dips and Interruption 5.7.1. Test Specification EN 61000-4-11 Environmental Phenomena Units Test Specification Performance Criterion Input AC Power Ports Voltage Dips Voltage Interruptions 0 % Reduction 0.5 Period 70 % Reduction 25 Period 0 % Reduction 250 Period B C C 5.7.2. Test Instrument Equipment Manufacturer Model Number Serial Number Cal.
PAGE 69
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.7.4. Test Procedure The EUT and its load are placed on a table which is 0.8 meter above a metal ground plane measured 1m*1m min. And 0.65mm thick min. And projected beyond the EUT by at least 0.1m on all sides. The power cord shall be used the shortest power cord as specified by the manufacturer. For Voltage Dips/ Interruptions test: The selection of test voltage is based on the rated power range.
PAGE 70
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.7.5.
PAGE 71
A Test Lab Techno Corp. Report Number: 1402CE13-01 5.7.6.
PAGE 72
A Test Lab Techno Corp.
PAGE 73
A Test Lab Techno Corp.
PAGE 74
A Test Lab Techno Corp.
PAGE 75
A Test Lab Techno Corp.
PAGE 76
A Test Lab Techno Corp.
PAGE 77
A Test Lab Techno Corp.
PAGE 78
A Test Lab Techno Corp.
PAGE 79
A Test Lab Techno Corp.
PAGE 80
A Test Lab Techno Corp.
PAGE 81
A Test Lab Techno Corp.
PAGE 82
A Test Lab Techno Corp.
PAGE 83
A Test Lab Techno Corp.
PAGE 84
A Test Lab Techno Corp.
PAGE 85
A Test Lab Techno Corp.
PAGE 86
A Test Lab Techno Corp.
PAGE 87
A Test Lab Techno Corp.
PAGE 88
A Test Lab Techno Corp.
PAGE 89
A Test Lab Techno Corp.
PAGE 90
A Test Lab Techno Corp.
PAGE 91
A Test Lab Techno Corp.
PAGE 92
A Test Lab Techno Corp.
PAGE 93
A Test Lab Techno Corp.
PAGE 94
A Test Lab Techno Corp.
PAGE 95
A Test Lab Techno Corp.
PAGE 96
A Test Lab Techno Corp.
PAGE 97
A Test Lab Techno Corp.
PAGE 98
A Test Lab Techno Corp.
PAGE 99
A Test Lab Techno Corp.
PAGE 100
A Test Lab Techno Corp.
PAGE 101
A Test Lab Techno Corp.
PAGE 102
A Test Lab Techno Corp.
PAGE 103
A Test Lab Techno Corp.
PAGE 104
A Test Lab Techno Corp.
PAGE 105
A Test Lab Techno Corp.
PAGE 106
A Test Lab Techno Corp.
PAGE 107
A Test Lab Techno Corp.
PAGE 108
A Test Lab Techno Corp.
PAGE 109
A Test Lab Techno Corp.
PAGE 110
A Test Lab Techno Corp.
PAGE 111
A Test Lab Techno Corp.
PAGE 112
A Test Lab Techno Corp.
PAGE 113
A Test Lab Techno Corp.
PAGE 114
A Test Lab Techno Corp.
PAGE 115
A Test Lab Techno Corp.
PAGE 116
A Test Lab Techno Corp.
PAGE 117
A Test Lab Techno Corp.
PAGE 118
A Test Lab Techno Corp.
PAGE 119
A Test Lab Techno Corp.
PAGE 120
A Test Lab Techno Corp.
PAGE 121
A Test Lab Techno Corp.
PAGE 122
A Test Lab Techno Corp.
PAGE 123
A Test Lab Techno Corp.
PAGE 124
A Test Lab Techno Corp.
PAGE 125
A Test Lab Techno Corp.
PAGE 126
A Test Lab Techno Corp.
PAGE 127
A Test Lab Techno Corp.
PAGE 128
A Test Lab Techno Corp.
PAGE 129
A Test Lab Techno Corp.
PAGE 130
A Test Lab Techno Corp.
PAGE 131
A Test Lab Techno Corp.
PAGE 132
A Test Lab Techno Corp.
PAGE 133
A Test Lab Techno Corp.
PAGE 134
A Test Lab Techno Corp.
PAGE 135
A Test Lab Techno Corp.
PAGE 136
A Test Lab Techno Corp.
PAGE 137
A Test Lab Techno Corp.
PAGE 138
A Test Lab Techno Corp.
PAGE 139
A Test Lab Techno Corp.
PAGE 140
A Test Lab Techno Corp.
PAGE 141
A Test Lab Techno Corp.
PAGE 142
A Test Lab Techno Corp.
PAGE 143
A Test Lab Techno Corp.
PAGE 144
A Test Lab Techno Corp.
PAGE 145
A Test Lab Techno Corp.
PAGE 146
A Test Lab Techno Corp.
PAGE 147
A Test Lab Techno Corp.
PAGE 148
A Test Lab Techno Corp.
PAGE 149
A Test Lab Techno Corp.
PAGE 150
A Test Lab Techno Corp.
PAGE 151
A Test Lab Techno Corp.
PAGE 152
A Test Lab Techno Corp.
PAGE 153
A Test Lab Techno Corp.