Product Manual

0064-0085-0M Rev B y 6880 Owner’s Manual 18

SCALE SETUP, CONT.

NOTE: The following two parameters are not used with the Model 6880 scale. Press

the

key to save the setting displayed, and then proceed to the next prompt.

;/ (Sonar Height Calibration)

The display will show ;! and the current setting 06. Press the

key to save the

current setting and proceed to the next prompt.

*`& (SENSOR HEIGHT)

The display will show *`; and the current setting. Press the

key to save the current

setting and proceed to the next prompt.

#! (HOLD TIME)

This setting is used by the scale to hold a stable patient weight for a desired amount of time.

For example, if a value of 5 seconds is used, then when the scale locks onto a stable

patient weight, it will remain locked for 5 seconds before automatically releasing the weight.

The display will show 6/3 and the current setting. If the value displayed is acceptable,

press the

key. Otherwise, press the

keys to select a new value and then press

the

key to save it and proceed to the next prompt.

This setting controls the auto-locking feature. Allowable values for hold time are 0 to 20.