Product Manual

0064-0085-0M Rev B y 6880 Owner’s Manual 16
SCALE SETUP, CONT.
#$ (End of Print Linefeeds – If *% (Com1 Mode) is set to $#//)
At the end of data sent to a printer, the scale can send carriage return/line feeds to position
the paper in the printer for removal or the next print.
The display will show #$ and the current setting. If the value displayed is acceptable,
press the
key. Otherwise, press the × or Ø keys to select a new value and then press
the
key to save it and proceed to the next prompt.
Allowable values are 0 to 9.
'*2 (USB Mode)
The display will show '*2 and the current setting. If the value displayed is acceptable,
press the
key. Otherwise, press the × or Ø keys to toggle the USB Mode between
$3 (Personal Healthcare Device Class), !!(0 (Welch Allyn), or *00 (SMA, Weight-
On-Demand), and then press the
key to save it and proceed to the next prompt.
This setting controls the output for the USB device port. Allowable settings are $3,
!!(0, or *00.
If $3 (Personal Healthcare Device Class) was selected for USB, the scale will transmit
data using the CEN ISO/IEEE 11073 Medical / Health Device Communication Standard.
If !!(0 (Welch Allyn) was selected for USB, the scale will automatically transmit data to a
Welch Allyn CVSM Device when the weight on the scale stabilizes and the [\ (STABLE)
annunciator turns on. (Requires device to have an activated license. Must purchase Detecto
WACONNECT)
If *00 (SMA, Weight-On-Demand) was selected for USB, and the scale is connected to a
computer for transmission of weight data to a PC-based EMR (electronic medical record)
software program, it will transmit a single set of weight data each time the computer sends a
weight request “ENQ” (hex 05) or an SMA weight request “W”.
&($ (Select Type of SMA Output – If '*2 (USB Mode) is set to *00)`
The display will show &($ and the current setting. If the value displayed is acceptable,
press the
key. Otherwise, press the × or Ø keys to select a new value and then press
the
key to save it and proceed to the next prompt.
Allowable settings are 0 or 1.
0 = Print Ticket 1 = Print Journal Line
#$ (End of Print Linefeeds – If '*2 (USB Mode) is set to *00)
At the end of data sent to a printer, the scale can send carriage return/line feeds to position
the paper in the printer for removal or the next print.
The display will show #$ and the current setting. If the value displayed is acceptable,
press the
key. Otherwise, press the × or Ø keys to select a new value and then press
the
key to save it and proceed to the next prompt.
Allowable values are 0 to 9.