Product Manual

0064-0085-0M Rev B y 6880 Owner’s Manual10

ANNUNCIATORS

The annunciators are displayed on the Weight screen to show that the scale is in the mode

corresponding to the annunciator label or that the status indicated by the label is active.

The low battery annunciator is located in the upper left corner of the display. It is used to

indicate the battery status. Refer to the Battery Operation, Battery Status section of this

manual for more details.

CAL (Calibration)

This annunciator is turned on when the scale is in the Scale Setup and Calibration mode.

[

(STABLE)

This annunciator is turned on when the weight display is stable. When off, it means that the

change in successive weight samples is greater than the motion limits selected during

setup.

(ZERO)

This annunciator is turned on to indicate that the weight displayed is within the +/- 1/4

division of the center of zero.

LOCK

This annunciator is turned on to show that the indicator is locked onto the displayed

weight. In operation, after obtaining a stable weight, pressing the key will cause the

scale display to lock onto the weight and turn on the annunciator. Pressing the key again

will unlock the display and turn off the annunciator.

BMI (Body Mass Index)

This annunciator is turned on when displaying the calculated body fat.

This annunciator is turned on to indicate that the displayed weight is in kilograms.

This annunciator is turned on to indicate that the displayed weight is in pounds.

This annunciator is turned on when the displayed height measurement is in centimeters.