Product Manual

0064-0085-0M Rev B y 6880 Owner’s Manual 4

WEIGHING UNITS SELECTION

NOTE! The following instructions apply to all models of the Detecto Model

6880 Rolling Chair Scale.

When the scale is turned on for the first time, it will display a prompt to select the weighing

units to use for your operation, lb (pounds) or kg (kilograms). The weighing units selection can

ONLY be made at this time and cannot be changed afterward. Make sure you select the

correct weighing units before proceeding.

1. Press the key to turn the scale on.

2. A display test will be performed (all digits on the weight display will turn on), then change to

show the software version for a few seconds, and finally, the display will change to show

:! '")& with the lb annunciator (factory units setting) turned on.

3. If the lb (pounds) units setting is acceptable, press the

key to save it, and then proceed

to step 5.

4. Otherwise, press the

keys to toggle the weighing units from lb (pounds) to kg

(kilograms), and then press the

key to save it.

5. The display will change to show ., with the Æ0Å (ZERO), the [\ (STABLE), and the kg

annunciator turned on.

6. The scale is now ready for operation.

IMPORTANT! Make sure you select the

correct weighing units. Once the weighing

units has been set, it cannot be changed.