Specifications

8200-M411-O1 Rev D y 210/215 Installation & Technical 36
SETUP AND CALIBRATION, CONT.
$9-0; ($9-0;) - Print Tab Settings
With $9-0; ($9-0;) displayed, press the ENTER key. The display will change to show the
current setting 06. To skip configuring the Print Tab Settings and proceed to the *$0
menu, press the ENTER key again. To configure Print Tab Settings, press the numeric key
1/YES (display will change to (*) and then the ENTER key. After pressing the ENTER key
the display will change to $69;>.
The general format for the input is A = YY.XX where A is the
character identifying the data printed, YY is the number of lines
down and XX is the number of spaces to the right.
NOTE! Enter 00 in either the YY or XX location to
disable the data from printing.
$69;> (Select Port for Printer)
Press the ENTER key to show the current value. If the setting
displayed is acceptable, press the ENTER key again to save it.
Otherwise, use the numeric keys to enter a new setting and then press the ENTER key to save
it. Allowable values are: 1 or 2.
NOTE! Although either port can be used for the printer port, it is recommended to
use the bi-directional port 1 with a bi-directional cable.
6'9> (Time Print Location)
Press the ENTER key to show the current setting for the location of time printing. If the setting
displayed is acceptable, press the ENTER key again to save it. Otherwise, use the numeric
keys to enter a new location and then press ENTER to save it.
3;> (Date Print Location)
Press the ENTER key to show the current setting for the location of date printing. If the setting
displayed is acceptable, press the ENTER key again to save it. Otherwise, use the numeric
keys to enter a new location and then press ENTER to save it.
-3> (ID Prompt Print Location)
Press the ENTER key to show the current setting for the location of ID prompt printing. If the
setting displayed is acceptable, press the ENTER key again to save it. Otherwise, use the
numeric keys to enter a new location and then press ENTER to save it.
0`0>
(Consecutive Number Print Location)
Press t
he ENTER key to show the current setting for the location of consecutive number
printing. If the setting displayed is acceptable, press the ENTER key again to save it.
Otherwise, use the numeric keys to enter a new location and then press ENTER to save it.
96**> (Gross Weight Print Location)
Press the ENTER key to show the current setting for the location of Gross weight printing. If
the setting displayed is acceptable, press the ENTER key again to save it. Otherwise, use the
numeric keys to enter a new location and then press ENTER to save it.
;9> (Tare Weight Print Location)
Press the ENTER key to show the current setting for the location of Tare weight printing. If the
setting displayed is acceptable, press the ENTER key again to save it. Otherwise, use the
numeric keys to enter a new location and then press ENTER to save it.