Specifications
8200-M024-O1 Rev H y 205 Installation & Technical
31
SETUP AND CALIBRATION, CONT.
`> (Gross Weight Accumulator Print Location)
Press the TARE/
ENTER key to show the current setting for the location of Gross weight
accumulator printing. If the setting displayed is acceptable, press the TARE/
ENTER key again
to save it. Otherwise, use the ASTERISK/UP ARROW and UNITS/LEFT ARROW keys to
input a new location and then press the TARE/ENTER key to save it.
0`> (Net Weight Accumulator Print Location)
Press the TARE/
ENTER key to show the current setting for the location of Net weight
accumulator printing. If the setting displayed is acceptable, press the TARE/
ENTER key again
to save it. Otherwise, use the ASTERISK/UP ARROW and UNITS/LEFT ARROW keys to
input a new location and then press the TARE/ENTER key to save it.
9!> (Carriage Return Line Feed) - Data Format Termination
Data transmitted from the serial I/O port can be terminated with a single carriage return and
either no line feed or a single line feed command. Press the TARE/
ENTER key to view the
current setting. A (* on the display means the data will be terminated with a carriage return
AND a line feed while a 06 on the display means the data will be terminated with a single
carriage return only.
If the setting displayed is acceptable, press the TARE/
ENTER key again to save it. Otherwise,
use the ASTERISK/
UP ARROW key to toggle to a new setting and then press the TARE/ENTER
key to save it.
6$> (End-Of-Print Line Feeds)
At the end of a data transmission to a printer, the indicator can transmit a pre-selected number
of line feed commands to space the paper in the printer to the desired position for withdrawal
or for the next print.
Press the TARE/
ENTER key to view the current setting. If the displayed value is acceptable,
press the TARE/
ENTER key to save it. Otherwise, use the ASTERISK/UP ARROW and
UNITS/LEFT ARROW keys to input the number of End-Of-Print linefeeds and then press the
TARE/
ENTER key to save it. Allowable values are: 0 through 99.