Specifications

8200-M024-O1 Rev H y 205 Installation & Technical
30
SETUP AND CALIBRATION, CONT.
$9-0; ($9-0;) - Print Tab Settings
With $9-0; ($9-0;) displayed, press the TARE/ENTER key. The display will change to
show the current setting 06. To skip configuring the Print Tab Settings and proceed to the
*$0 menu, press the TARE/
ENTER key again. To configure the Print Tab Settings, press
the ASTERISK/
UP ARROW key (display will change to (*) then the TARE/ENTER key. After
pressing the TARE/
ENTER key the display will change to $69;>.
The general format for the input is A = YY.XX where A is the
character identifying the data printed, YY is the number of lines
down and XX is the number of spaces to the right.
NOTE! Enter 00 in either the YY or XX location to
disable the data from printing.
$69;> (Select Port for Printer)
Press the TARE/
ENTER key to show the current value. If the
setting displayed is acceptable, press the TARE/
ENTER key again
to save it. Otherwise, use the ASTERISK/
UP ARROW key to toggle to a new setting and then
press the TARE/
ENTER key to save it. Allowable values are: 1 or 2.
NOTE! Although either port can be used for the printer port, it is recommended to
use the bi-directional port 1 with a bi-directional cable.
-3`> (ID Prompt Print Location)
Press the TARE/
ENTER key to show the current setting for the location of ID prompt printing. If
the setting displayed is acceptable, press the TARE/
ENTER key again to save it. Otherwise,
use the ASTERISK/UP ARROW and UNITS/LEFT ARROW keys to input a new location and
then press the TARE/ENTER key to save it.
0`0> (Consecutive Number Print Location)
Press the TARE/
ENTER key to show the current setting for the location of consecutive number
printing. If the setting displayed is acceptable, press the TARE/
ENTER key again to save it.
Otherwise, use the ASTERISK/
UP ARROW and UNITS/LEFT ARROW keys to input a new
location and then press the TARE/
ENTER key to save it.
96**> (Gross Weight Print Location)
Press the TARE/
ENTER key to show the current setting for the location of Gross weight
printing. If the setting displayed is acceptable, press the TARE/
ENTER key again to save it.
Otherwise, use the ASTERISK/UP ARROW and UNITS/LEFT ARROW keys to input a new
location and then press the TARE/ENTER key to save it.
;9> (Tare Weight Print Location)
Press the TARE/
ENTER key to show the current setting for the location of Tare weight printing.
If the setting displayed is acceptable, press the TARE/
ENTER key again to save it. Otherwise,
use the ASTERISK/UP ARROW and UNITS/LEFT ARROW keys to input a new location and
then press the TARE/ENTER key to save it.
0;> (Net Weight Print Location)
Press the TARE/
ENTER key to show the current setting for the location of Net weight printing.
If the setting displayed is acceptable, press the TARE/
ENTER key again to save it. Otherwise,
use the ASTERISK/UP ARROW and UNITS/LEFT ARROW keys to input a new location and
then press the TARE/ENTER key to save it.