Specifications

8200-M024-O1 Rev H y 205 Installation & Technical
29
SETUP AND CALIBRATION, CONT.
;9:> (Threshold Weight)
Press the TARE/
ENTER key to show the current value. If the setting displayed is acceptable,
press the TARE/
ENTER‘ key again to save it. Otherwise, use the ASTERISK/UP ARROW key to
toggle to a new value for the threshold weight or zero (0) to disable the traffic light and then
press the TARE/
ENTER key to save it.
The threshold weight is used to automatically toggle between the Red and Green lights.
• When the scale gross weight is less than the threshold weight, the Green light will be on,
otherwise the Red light will turn on and stay on until the weight goes below the threshold
weight or a ticket is printed.
• When a ticket is printed, the Green light will turn on and stay on until the scale gross weight
goes below and back above the threshold weight and then the Red light will turn on.
• NOTE! If you enter a zero (0) for the threshold weight (&%*>), the traffic light feature
will be disabled (turned off).