Specifications

8200-M024-O1 Rev H y 205 Installation & Technical
26
SETUP AND CALIBRATION, CONT.
*-6 (*-6) - Serial Input/Output
With *-6 (*-6) displayed, press the TARE/ENTER key. The display will change to show the
current setting 06. To skip configuring the *-6 (serial input/output) and proceed to the
$9-0; menu, press the TARE/
ENTER key again. To configure the *-6, press the
ASTERISK/
UP ARROW key (display will change to (*) and then press the TARE/ENTER key.
After pressing the TARE/
ENTER key, the display will change to 2'3>.
2'3> (Serial Port Baud Rate)
Press the TARE/
ENTER key to show the current value. If the setting displayed is acceptable,
press the TARE/
ENTER key again to save it. Otherwise, use the ASTERISK/UP ARROW key to
toggle to a new baud rate for the serial ports and then press the TARE/
ENTER key to save it.
Allowable values are:
12 = 1200 Baud 24 = 2400 Baud 48 = 4800 Baud
96 = 9600 Baud 19 = 19.2k Baud 38 = 38.4k Baud
76 = 76.8k Baud
$9;=> (Serial Port Parity)
Press the TARE/
ENTER key to show the current value. If the setting displayed is acceptable,
press the TARE/
ENTER key again to save it. Otherwise, use the ASTERISK/UP ARROW key to
toggle to a new setting and then press the TARE/
ENTER key to save it. Allowable values are:
0 = NONE (No Parity) 1 = Odd Parity 2 = Even Parity
2-;*> (Serial Port Data Bits)
Press the TARE/
ENTER key to show the current value. If the setting displayed is acceptable,
press the TARE/
ENTER key again to save it. Otherwise, use the ASTERISK/UP ARROW key to
toggle to a new setting and then press the TARE/
ENTER key to save it. Allowable values are: 7
or 8.
*;6$> (Serial Port Stop Bits)
Press the TARE/
ENTER key to show the current value. If the setting displayed is acceptable,
press the TARE/
ENTER key again to save it. Otherwise, use the ASTERISK/UP ARROW key to
toggle to a new setting and then press the TARE/
ENTER key to save it. Allowable values are: 1
or 2.
60;> (Continuous Output Serial Port 1)
Press the TARE/
ENTER key to show the current value. If the setting displayed is acceptable,
press the TARE/
ENTER key again to save it. Otherwise, use the ASTERISK/UP ARROW key to
toggle to a new setting and then press the TARE/
ENTER key to save it.
60;>`(* 60;>`06
Continuous Output No Continuous Output
If 60;>`(* (Continuous Output) is selected, an additional prompt, ;($>
will be displayed.
If 60;>`06 (No Continuous Output) is selected, proceed to the Weight On
Demand section.
;=$> (Continuous Output Format)
Press the TARE/
ENTER key to show the current value. If the setting displayed is acceptable,
press the TARE/
ENTER key again to save it. Otherwise, use the ASTERISK/UP ARROW key to
toggle to a new setting and then press the TARE/
ENTER key to save it. Allowable values are:
0 = SMA 3 = Rice Lake IQ355 6 = Number
1 = SB-400 4 = AnDFV 7 = Toledo Short
2 = SB-200 5 = WI110 8 = SB500 with Traffic Light