Specifications

8200-M024-O1 Rev H y 205 Installation & Technical
18
SETUP AND CALIBRATION, CONT.
'0-;> (Weighing Unit 1)
Press the TARE/
ENTER key to show the current value. If the setting displayed is acceptable,
press the TARE/
ENTER‘ key again to save it. Otherwise, use the ASTERISK/UP ARROW key to
toggle to a new setting and then press the TARE/
ENTER key to save it. Allowable values are:
0 = none 3 = lb (pounds) 6 = tonnes (metric tons)
1= tn (tons) 4 = oz (ounces) 7 = lb/oz (pounds/ounces)
2= g (grams) 5 = kg (kilograms)
-0;> (Interval Setting)
Press the TARE/ENTER key to show the current value.
If !;`>` (Legal For Trade = YES), use the ASTERISK/
UP ARROW key to toggle to a
new setting and then press the TARE/
ENTER key to save it. Allowable values are: 1, 2, 5,
10, 20 or 50.
If !;> (Legal For Trade = NO), use the ASTERISK/
UP ARROW key to toggle to a new
setting and then press the TARE/
ENTER key to save it. Allowable values are: 1 through 99.
In either case, if the setting displayed is acceptable, press the TARE/ENTER key again it.
3$$> (Decimal Point Setting)
Press the TARE/
ENTER key to show the current value. If the setting displayed is acceptable,
press the TARE/
ENTER‘ key again to save it. Otherwise, use the ASTERISK/UP ARROW key to
toggle to a new setting and then press the TARE/
ENTER key to save it. Allowable values are:
0, 1, 2 or 3.
0 = XXXXXX 2 = XXXX.XX
1= XXXXX.X 3 = XXX.XXX
$> (Capacity)
Press the TARE/
ENTER key to show the current value. If the setting displayed is acceptable,
press the TARE/
ENTER‘ key again to save it. Otherwise, use the ASTERISK/UP ARROW key to
toggle to a new setting and then press the TARE/
ENTER key to save it. Allowable values are: 1
through 999,999. NOTE! Capacity cannot exceed 999,999.
'0-;> (Weighing Unit 2)
Press the TARE/
ENTER key to show the current value. If the setting displayed is acceptable,
press the TARE/
ENTER‘ key again to save it. Otherwise, use the ASTERISK/UP ARROW key to
toggle to a new setting and then press the TARE/
ENTER key to save it. Allowable values are:
0 = none 3 = lb (pounds) 6 = tonnes (metric tons)
1= tn (tons) 4 = oz (ounces) 7 = lb/oz (pounds/ounces)
2= g (grams) 5 = kg (kilograms)
NOTE! The selection for '0-; cannot
be the same as '0-;. In addition,
dependent upon the selection for '0-; and the interval and decimal point settings,
not all unit combinations are available.
;9> (Zero Tracking Range)
Press the TARE/ENTER key to show the current value assigned to the Automatic Zero
Tracking Range. This is the value in scale divisions that will be automatically zeroed off. If the
setting displayed is acceptable, press the TARE/ENTER‘ key again to save it. Otherwise, use
the ASTERISK/UP ARROW key to toggle to a new setting and then press the TARE/ENTER
key to save it. Allowable values are: 0 (disables Zero Tracking), .5, or 1 through 9.