Specifications

SPECIFICATIONS

Power Requirements: 115 VAC 50/60Hz 12 VDC 300mA wall plug-in UL/CSA

listed AC power adapter, Cardinal part number 728R90.

lso available, for 230 VAC operation, Cardinal part number

6800-1045 OR (6) C cell batteries, Alkaline, Ni-Cad or

NiMH (batteries not included)

Operating Temperature: 14 to 104 ºF (-10 to +40 ºC)

Display: Six digit, seven segment, 1" high LCD

Sensitivity: 1.2uV/division (0 to 3.0 mV/V), Class III

Signal Input Range: 0.2mV to 15mV max.

Transducer Excitation: 5.0 VDC

Number of Load Cells:

up to 4 each 350:

Load Cell Cable Length: 30 feet max.

Resolution: 5,000 divisions

Capacities: 1,000 to 5,000 divisions commercial

up to 10,000 divisions noncommercial

Division Value: 1, 2, 5 or 10 x 1, 0.1, 0.01, 0.001

Sample Rate: 1 to 10 samples per second selectable

Auto Zero Range: 0.5 or 1 through 9 divisions

Weighing Units: Pounds, kilograms, ounces or grams

Keyboard: Membrane type with 7 keys

Enclosure Size: 8" W x 6 5/8" H x 2 1/8" D (204 x 168 x 54mm)

Enclosure Construction: 304 Stainless Steel

Weight: 2.1 lb (without batteries) – 3.1 lb (with batteries)

Certifications

This equipment is certified to comply with the requirements for a Class III/IIIL device by the

x National Conference on Weights and Measurements (Certificate No. 02-016A1)

x Measurement Canada (Approval No. AM-5436)

x Australian Government National Standards Commission (Approval No. S430)

x And for accuracy Class III and IIII by OIML (Certificate No. R76/1992-DK-02.03)

8555-M313-O1 Rev G x 204 Installation & Technical