Owners manual

1. Set up user in APP (See page 7-8, SET UP APP PROFILE).

2. Pair scale and smart device (See page 8, PAIRING SCALE AND SMART DEVICE).

USE ONLY WHEN YOUR SCALE and PHONE ARE

PAIRED FOR THE FIRST TIME.

3. Manually recall the user on the scale – turn on the scale,

using the up and down arrow buttons until you find

your User Number.

4. Open APP

NOTE: Your data is securely saved in the cloud and will not be lost if you lose your smart

device or get a new one.

5. When the scale shows zero reading, step on the scale

with bare feet, positioning your feet evenly on the

metal electrodes. Stand still on the scale to measure your

weight. Your weight will appear on the screen after the

weight is stable and locked. Please continue to stand

still on the scale. A pattern on the readout (show

pattern) displays while the scale estimates your body

composition. (Fig.8)

6. When the measurement is done, the measurement data will display on the LCD readout. There are

6 screens to be shown for body fat, body water, muscle mass, bone mass, BMI and KCAL. In the

meantime, the result will be sent to the smart phone automatically via Bluetooth. Each screen will

be shown for 3 seconds. When user still stands on the scale, these 6 screens will be shown for 3 cycles.

If the user gets off of the scale then the measurements will be shown for only 1 cycle then the scale

will turn off automatically. (Fig.9)

(Fig.8)

(Fig.9)

3 sec 3 sec 3 sec