Owners manual

PREPARATION BEFORE USE

1. Insert the Battery

2. Set the Right Position

TIPS

Open the battery cover on the back of the scale unit. Insert the batteries.

Be sure the polarity of the battery is set properly for proper function. If

you do not intend to use this unit for a prolonged period of time, it is

advisable to remove the battery before storage.

Use the scale on a flat and hard floor surface.

Do not use on carpeted floors.

IMPORTANT!

Every time you change the batteries, the date/time clock in the scale

resets and you will need to re-pair the scale and Smart device.

(See Section “PAIR SCALE AND SMART DEVICE SET UP APP

PROFILE”)

3. Start-up the Scale

Press lightly on the scale platform to start-up the scale,

the display shows 0.0 and then turns off.

The scale is ready for use.

1. Replace battery

when Lo is

displayed.

2. Open the

battery door.

3. Direction of the

3 AAA batteries.

Open the battery door

Direction of the 3 AAA batteries

PRECAUTION !

Allow the scale to go

into zero mode after

each battery insertion

/replacement and every

time you move the

scale to a new location.