Owners manual

16
2. MEASURING BY SELECTING A USER NUMBER MANUALLY
2.1
Press “On/Off” to turn the scale on.
2.2 Press [ ] or [ ] to choose
your memory number (P1-P8).
2.3 The memory number will blink for
3 times, display the personal profile
and then zero for weighing.
2.4 When the scale shows zero
reading, step on the scale with
bare feet, positioning your feet
evenly on the metal electrodes.
2.5 Stand still on the scale to
measure your weight. Your
weight will appear on the
screen after the weight is
stable and locked. Please
continue to stand still on the
scale. A pattern on the readout
(Fig.10) displays while
the scale estimates your
body composition.
2.6 When the measurement is done, the measurement data will display on the LCD
readout. There are 6 screens to be shown for Body Fat, Body Water, Muscle Mass,
Bone Mass, BMI and KCAL. In the meantime, the result will be sent to the smart
phone automatically via Bluetooth. Each screen will be shown for 3 seconds. When
user stands still on the scale, these 6 screens will be shown for 3 cycles. If the user
gets off of the scale, then the measurements will be shown for only 1 cycle and the
scale will turn off automatically.
(Fig.10)