Owners manual

15
IMPORTANT NOTICE
A few steps must be followed before estimating body fat and total body water.
PROGRAM PERSONAL DATA
Input the user’s height, age, gender and normal or athlete mode. Once the information is memorized,
it will only need to be re-entered if there is a change to the data.
1. SET UP PROFILE
1.1 Select a memory Number
Press “On/Off” when the scale is off. The scale will
turn on and “P1” will blink on the display. Press
[ ] or [ ] to choose a memory number (P1-P8).
Press “Enter” to confirm the memory number selection.
1.2 Set Height
Press [ ] or [ ] to adjust the Height. Press “Enter”
to confirm the height setting.
1.3 Set Age
Press [ ] or [ ] to adjust the Age. Press “Enter”
to confirm the age setting.
1.4 Select Gender
Press [ ] or [ ] to choose Male/Female. Press
“Enter” to confirm the gender setting and go to the
Normal/Athlete type setting. Users under the age
of 17 will skip the Normal/Athlete setting.
BODY FAT AND TOTAL BODY WATER ESTIMATING OPERATION
1.5 Set Normal/Athlete type
Press [ ] or [ ] to choose Normal/Athlete type.
Press “Enter” to confirm and all other selections.
The personal profile will be saved in the scale.
1.6 After the personal profile setup is done,
the scale will display your personal profile once.
When zero reading shows, you may step on the scale
with bare feet for your body composition. Otherwise,
the scale will turn off automatically.
1.7 Repeat above steps to set up for another
user with different memory number.