Owners manual

AFTER FIRST USE

1. Open APP

3. When the measurement is done, the measurement data will display on the LCD readout. There are 6

screens to be shown for body fat, body water, muscle mass, bone mass, BMI and KCAL. In the meantime,

the result will be sent to the smart phone automatically via Bluetooth. Each screen will be shown for 3

seconds. When user still stands on the scale, these 6 screens will be shown for 3 cycles. If the user gets of

of the scale then the measurements will be shown for only 1 cycle then the scale will turn off automatically

(Fig.11).

NOTE: Your data is securely saved in the cloud and will not be lost if you lose your smart

device or get a new one.

MANUALLY INPUT THE WEIGHT RECORD

If you are traveling and cannot use your smart scale but still want to track your weight, you

will need to manually enter in the data onto the APP.

• Click on the

detail button

• From the profile

screen click on

the Weight data

• Then click on the weight arrow

• Click Add new data

• Then fill out your weight and click save

(Fig.10)

(Fig.11)

2. User just need to step on the scale with bare feet,

and the scale will recall the proper user memory

automatically by the weight record, and then go

for body composition estimation. (Fig.10)

3 sec 3 sec 3 sec