iConnect, the first step to a healthier you™ Bluetooth Connected Body Fat Scale with Body Water, Body Muscle, Bone Mass, BMI, Calorie Intake and Athlete Mode MODEL #D303 USERS MANUAL
Table of Contents INTRODUCTION ............................................................................................................... 3 NOTES ON SAFETY ........................................................................................................... 3 INTENDED USE .................................................................................................................. 4 PRECAUTION NOTICE .............................................................................................
D303 iConnect, the first step to a healthier you™ INTRODUCTION Congratulations! You have purchased a precision health monitoring product that should provide you with years of accurate use. To assure you obtain the best performance, please read the following set-up and use instructions carefully before using the scale.
INTENDED USE This scale is intended to measure body weight and impedance and estimate percentage of body fat and body water, bone mass and muscle mass using BIA (Bioelectrical Impedance Analysis). It is intended for use by healthy children 10-17 years old and healthy adults with active, moderately active, to inactive lifestyles for body composition assessment in the home environment.
• Turn the scale on or off & • Changes value of height and age, toggle between Male and Female, toggle between Normal and Athlete mode in Body Fat function.
PREPARATION BEFORE USE 1. Insert the Battery Open the battery cover on the back of the scale unit. Insert the batteries. Be sure the polarity of the battery is set properly for proper function. If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the battery before storage. Open the battery door TIPS 1. Replace battery when Lo is displayed. 2. Open the battery door. 3. Direction of the 3 AAA batteries.
OPERATION The accuracy of the results depends on how you stand on the scale. Position your feet on the scale so that your feet are touching as much of the two electrodes as possible. This ensures the best contact between your feet and the metal contacts. Stay on the scale until the body fat estimation is completed and the result is displayed. Heels centered on electrodes (Correct) Heels not touching the electrodes (Incorrect) WEIGHING-ONLY OPERATION 1.
PAIRING SCALE AND SMART DEVICE (continued) 1.4 Open the APP. From APP main dashboard, click on the setting icon ( )this will take you to the Setting page of the APP. Click on the ( ) button, this will enter into the pair process which will start searching for your scale. Then press and hold the “UNIT” button on the back of the scale for a few seconds, the scale will enter pair mode with below screen display. (Fig.5&6) 1.5 The picture of the scale you have will show up on the Add Device screen of APP. 1.
USE ONLY WHEN YOUR SCALE and PHONE ARE PAIRED FOR THE FIRST TIME. 1. Set up user in APP (See page 7-8, SET UP APP PROFILE ). 2. Pair scale and smart device (See page 8, PAIRING SCALE AND SMART DEVICE). 3. Manually recall the user on the scale – turn on the scale, using the up and down arrow buttons until you find your User Number. 4. Open APP 5. When the scale shows zero reading, step on the scale with bare feet, positioning your feet evenly on the metal electrodes.
AFTER FIRST USE 1. Open APP 2. User just need to step on the scale with bare feet, and the scale will recall the proper user memory automatically by the weight record, and then go for body composition estimation. (Fig.10) (Fig.10) 3. When the measurement is done, the measurement data will display on the LCD readout. There are 6 screens to be shown for body fat, body water, muscle mass, bone mass, BMI and KCAL. In the meantime, the result will be sent to the smart phone automatically via Bluetooth.
GRAPHING THE DATA COLLECTED From the profile screen, click on the measurement you want to graph - Choose from Weight, Body Fat, Body Water, Bone Mass, Muscle Mass or Calories.
The week will give you a snapshot of your progress from Sunday to Saturday. The red dot will be on the last date that you weighed yourself. The month will let you see your progress for the entire month. Scroll left & right to move the dates. The year gives you a 12 month snapshot of where you were on average each month. Scroll down to see your Current Stats – Goal Weight, Current Weight and Weight to Lose or Gain. This will also show you your current BMI.
EXPORTING YOUR RESULTS TO AN EXCEL FILE The Detecto® iConnect™ Health AP APP allows you to export all of your data to an excel file which can be analyzed or shared with your health professional. • From the Profile page, click on the settings button on the upper right of the screen ( ). • From the settings page, click on excel export, enter the email address you want it sent to and click send. • All of the info will be in an easy to read excel file organized by date.
To view the data in the Apple Health APP follow the below steps: • Open the Apple Health App • Select “Body Measurements” • Click “Health data” at the bottom of the APP • There are 4 Measurements that the Detecto iconnect APP can share – (Weight, Body Fat, BMI and Height) • Choose the desired measurements and turn on the dashboard function MANUAL SET UP OF THE SCALE This is not required if you have already set up your profile on the APP.
BODY FAT AND TOTAL BODY WATER ESTIMATING OPERATION IMPORTANT NOTICE A few steps must be followed before estimating body fat and total body water. PROGRAM PERSONAL DATA Input the user’s height, age, gender and normal or athlete mode. Once the information is memorized, it will only need to be re-entered if there is a change to the data. 1. SET UP PROFILE 1.1 Select a memory Number Press “On/Off” when the scale is off. The scale will turn on and “P1” will blink on the display.
2. MEASURING BY SELECTING A USER NUMBER MANUALLY 2.1 Press “On/Off” to turn the scale on. 2.2 Press [ ] or [ ] to choose your memory number (P1-P8). 2.3 The memory number will blink for 3 times, display the personal profile and then zero for weighing. 2.4 When the scale shows zero reading, step on the scale with bare feet, positioning your feet evenly on the metal electrodes. 2.5 Stand still on the scale to measure your weight.
PROBLEM SOLVING 1. No weight display? Check if the scale is powered on. If not, please refer to the section “Preparation Before Use”. 2. Why does the display read “Lo”? Battery is running low. Replace the battery. 3. The message displayed “— ”. Negative weight. Step off the scale and wait until the scale automatically switches off. The scale is ready for use again. 4. The message displayed “Err 0”. Initialization error. Step off the scale and wait until the scale automatically switches off.
CARE AND MAINTENANCE 1. Do not disassemble the scale other than replacing the battery; it contains no user serviceable parts. Damage to the scale may occur as a result of improper handling. 2. Remove battery when the scale is not used for a prolonged period of time. 3. Clean the scale after use with a dampened cloth. Do not use solvents or immerse the unit in water. 4. Avoid excessive impact or vibration to the scale, such as dropping it onto the floor. PRODUCT SPECIFICATIONS 1.
The optimal % BF of an individual varies according to age and gender.
3. Why is it important to monitor percentage Total Body Water (%TBW) in the body? Water is an essential component of the body and its level is one of the health indicators. Water makes up approximately between 50-70% of the body’s weight. It is present proportionally more in lean tissue compared to fat tissue. Water is a medium for biochemical reactions that regulate body functions. Waste products are carried in water from cells for execution in urine and sweat.
5. Why is the Athlete Mode necessary in a Body Fat Analyzer? It has been found that body fat estimation using BIA could overestimate the percentage body fat of adult elite athletes. The physiological variation of athletes in bone density and level of hydration are two of the reasons that account for the difference. The Athlete mode is suitable for user ages 15 and older. 6. Definition of an Athlete The general consensus among researchers is that a quantitative dimension could be used in defining an athlete.
Contains FCC ID : 2AHM2-D303 FCC STATEMENT: 1. This devise complies with Part15 of the FCC Rules. Operation is subject to the following two conditions” (1) This device may not cause harmful interference, a (2) this devise must accept any interference received, including interference that may cause undesired operation. 2. Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
