Owners manual

5
Program Personal Data
1. Press the SET button to turn the scale on (figure 10)
2. LCD will flash 1- 4 for the user numbers (figure 11)
3. Press the SET button again and choose
P1- P4 as your user number
Select the user number by using the Up or Down
Arrows to select a memory location (1-4 users).
Press the SET button to confirm. (figure 12)
4. Select unit by pressing the UP and DOWN arrows
to choose either “lb” or “kg”. (figure 13)
5. Select gender: Press the UP and DOWN buttons
to select the Female or Male icons (figure 14)
6. Set age: Press the UP and DOWN buttons to adjust
the age and then press the SET button to confirm.
(figure 15)
7. Set height: Press the UP and DOWN buttons
to adjust the height and then press the SET
button to confirm. (figure 16)
8. All personal information stored to memory will be
displayed once and then go into weighing mode.
9. Repeat steps 1-8 to set other pre-programmed
user numbers.
SET
SET
fig10
fig11
fig12
fig14
fig13
fig15
fig16