OVER 100 Y E A R S OF MEDICAL ACCUR ACY STAINLESS STEEL LCD DIGITAL SCALE WITH BMI, CALORIE PREDICTOR AND LAST WEIGHT TRACKING MODEL D130 USERS MANUAL
STAINLESS STEEL LCD DIGITAL SCALE MODEL D130 Congratulations! You have purchased a precision health monitoring product that should provide you with years of accurate use. This scale has a special finger print /toe print resistant protective coating. To assure you obtain the best performance please read the following set-up and use instructions carefully before using the scale. BEFORE USING THIS SCALE – PLEASE READ Battery Installation – Uses one 3V Lithium battery (included). 1.
General Operation 1. Select the weight unit you want amount lb/kg by pressing the button SET 2. Place the scale on a flat, hard surface. Carpeted or uneven floors may affect accuracy. (figure 5) 3. Step on the scale platform and remain still. The display will count up to your weight. The display will flash three times when the weight is locked. Your weight is now displayed. fig 5 Important: 1. The maximum capacity of this scale is 400 lbs / 180 kgs.
Advice for use & care: 1. The stainless steel platform will be slippery when it is wet. Keep dry. 2. Keep standing still during the course of weighing. 3. Treat the scale with care as it is a precise instrument. 4. Clean the scale with a damp cloth and avoid water getting inside the scale. DO NOT use chemical/abrasive cleaning agents. 5. Keep the scale in cool place with dry air. 6. If scale fails to turn on, check whether battery is installed properly, or battery power is low.
Program Personal Data 1. Press the SET button to turn the scale on (figure 10) SET fig10 2. LCD will flash 1- 4 for the user numbers (figure 11) fig11 3. Press the SET button again and choose P1- P4 as your user number Select the user number by using the Up or Down Arrows to select a memory location (1-4 users). Press the SET button to confirm. (figure 12) SET fig12 4. Select unit by pressing the UP and DOWN arrows to choose either “lb” or “kg”. (figure 13) fig13 5.
Weighing Mode 1. After setting up your profile the scale is ready for weighing. Press the set button and then use the up and down arrows to select your user number. 2. Once you have selected your user number wait until the scale goes to 0.0 and then step onto the scale. 3. Your current weight will be shown three times. Then your last weight will be shown and then the difference of the two weights. Next you will be shown your BMI and calorie recommendation.
Education Information What's Calorie Predictor? The Calorie Predictor function estimates the number of calories required based on your body composition and user entered personal data. This tool can be used as a guide when setting daily calorie goals during weight loss and exercise programs. What's is Body Mass Index (BMI)? BMI is a ratio of a person’s weight to height.
LIMITED LIFETIME WARRANTY Your DETECTO product is warranted to the original consumer only, for the lifetime of the product, to be free from defects in materials and workmanship under normal use. This product is designed for personal use only. DETECTO, used under license by Lifespan Brands LLC, has the right to nullify the Warranty Agreement should the product be used in a commercial environment. This warranty is void if the product has been tampered with, misused, abused or modified.
