Owners manual

2
GLASS LCD DIGITAL SCALE
MODEL D107
Congratulations! You have purchased a precision health monitoring product that should provide you
with years of accurate use. To assure you obtain the best performance please read the following set-
up and use instructions carefully before using the scale.
Important:
General Operation
1. Battery Installation – Uses two 3V Lithium batteries (included)
2. Open the battery compartment cover on the backside of the scale. (Figure 1)
3. Gently pull out the plastic tab to activate the batteries.
4. Replace the battery compartment cover. (Figure 2)
1. The maximum capacity of this scale is 400 lbs / 180 kgs / 28 ST 8lbs. Should “O-Ld” appear
on the display during a weighing, this indicates that the maximum weighing capacity of the
scale has been exceeded. Remove the weight immediately; otherwise, permanent damage
may occur.
1. Select the weight unit you want lb/kg/st. (Figure 3)
Button is located on the back of the scale. Press the button
to switch between lb/kg/st.
2. Place the scale on a flat, hard surface. Carpeted or uneven
floors may affect accuracy. (figure 4)
3. Step on the scale (disregarding the reading) and step off.
This process ensures that the scale is set and ready to use.
Do this whenever the scale is moved. At all other times
step straight onto the scale.
4. Step on the scale platform and remain still. The display will
count up to your weight. The display will flash twice when
the weight is locked. Your weight is now displayed.
BEFORE USING THIS SCALE—PLEASE READ
fig 4
fig 2
fig 1
battery
compartment
fig 3
UNIT