User`s guide

- 39 -
This chart will help you to Arm from the Master keypad.
Arming from the Master Keypad - DS7447/DS7447E only
Arming from the Master keypad
Arming all the
Partitions you have
access to
Enter your PIN followed by one of the arming sequences.
This will arm all of your partitions, even if some are already armed.
Arming only some of
your Partitions
You must enter Single Partition Mode
to arm the necessary partitions one at a time (see page 39).
1. Enter your [PIN] followed by the [#] key twice: [1] [2] [3] [4] [#] [#]
2. The first partition you have access to will be displayed: “Ready to Arm. Cafeteria.”
3. Complete the arming command sequence you wish for this partition: [On].
4. Move to the next partition you have access to by pressing the [#] key twice: [#] [#]
5. The next partition you have access to will be displayed: “Ready to Arm. Office.”
6. Complete the arming command sequence you wish for this partition.
7. After you have completed all the arming command sequences for the partitions you
have access to, exit Single Partition Mode by pressing the [*] key for 2 seconds.
The system will also automatically drop out of Single Partition Mode after 40 seconds
without a keypad entry.