User`s guide

- 37 -
The Master Keypad - DS7447/DS7447E only
Your system may include a Master keypad.
A Master keypad is a DS7447/DS7447E keypad programmed to give a user access to all the partitions he has access to, not just
the partition the Master keypad is in. This is different from a Standard keypad in that Standard keypads only give access to the
single partition they are in. Commands entered at the Master keypad will affect all the partitions the user has access to. If this is not
desirable, the Master keypad can also be used to control each partition individually; this is called Single Partition Mode. Single
Partition Mode allows a user to control any or all of the partitions he has access to on an individual (one by one) basis (see page 41
for more information on Single Partition Mode).
In order to use the Master keypad, your PIN must be assigned to the partition that the Master keypad is located in.
Displays at the Master keypad (also see the following page)
Master keypad displays will differ slightly from Standard keypads. The Master keypad display will scroll the Status of each
partition, followed by the partition number. For example, if all partitions are armed, the Master keypad will scroll through the
following displays:
If only partitions 1, 2, 3, 4, 6, and 8 are armed, the Master keypad will scroll through the following displays:
Displays for partitions that are Not Ready will display in the same manner.
Armed
area 1
Armed
area 2
Armed
area 3
Armed
area 4
Armed
area 5
Armed
area 6
Armed
area 7
Arme
d
area
8
A
rmed
area 1
Armed
area 2
Armed
area 3
Armed
area 4
Ready to Arm
area 5
Armed
area 6
Ready to Arm
area 7
Arme
d
area
8