User`s guide

- 15 -
This section explains how to cause the system to arm after a specified number of hours.
Delayed arming is simply causing the system to arm after a specified number of hours.
To program the system for delayed arming, perform the following steps:
Additional Notes: Delayed arming can be used even if there are no automatic arming times programmed.
If delayed arming is used in Master Keypad mode, it will affect all partitions you have access to. If delayed arming is used in single
partition mode, or from a single partition keypad, it will affect only the partition you are working in.
Delayed arming will override automatic arming. Delayed arming will also provide a 15 minute pre-arm period like the one provided
with automatic arming.
Delayed Arming
Notes
Delaying Arming
Enter a [PIN]
Enter [9] [9]
to enter the Delayed Arming programming
Enter the number of hours from now that you
would like the system to arm.
For example: If it is 3:30 now, and you would like
the system to arm at 9:30, enter [0] [6] [#].
Enter number of hours to delay arming.
Enter in [0] [1] [#] format
The keypad will display the following:
Arm in nn Hours
# to accept