User`s guide

- 14 -
This section explains how to delay the Automatic Arming Time.
To inform occupants that the system is about to arm, a pre-arming period will begin 15 minutes before the system arms auto-
matically. The keypad sounders, and any outputs programmed to follow the keypad sounders, will pulse five times every minute.
During the last five minutes before arming, these sounders will be on steady.
Once per minute the keypad (DS7447/DS7447E only) will read, “Arm in nn min./PIN + OFF - extend.”
If automatic arming is used in Master Keypad mode, it will affect all partitions you have access to.
If used in single partition mode, or from a single partition keypad, it will affect only the partition you are working in.
To extend the Automatic Arming of the system during the automatic arming pre-arming period, perform the following steps:
Note: The keypad volume setting also applies to the Auto Arm tone.
Delaying Automatic Arming
What will HappenExtending Automatic Arming*
Enter a [PIN]
Press [OFF]
The arming time will be extended 30
minutes from when you press [OFF].
A new pre-arming period will
begin 15 minutes prior to the new
automatic arming time.
* = To extend the Automatic Arming at any time, use the Delayed Arming feature on page 15.