Specifications

Figure 34.1. (Added) Special junction box.

f. Connect the dc leads of the ME-26A/U to

h. Insert the TS-1777/VRM-l test probe tip

terminals A (ground) and J (B+) of the 18- in test jack A. The GREEN indicator must light.

terminal female connector of the CX-7899/VRM-

1. The voltage must be between 21 and 22 volts

65. Output Tests

dc.

(fig. 34.4)

Note. For the remaining tests, l djust the model 3206

a. Leave the TS-1777/VRM-l ON-OFF switch

power supply form output between +23.4 and +28.6 volts

in the ON position, and the selector switch at A.

dc.

b. Adjust the output of the PP-3514/U to 0

g. Connect the AN/USM-98 positive lead to

volt dc.

TS-1777/VRM-l test jack A, and the negative

c. Through the special junction box, connect

lead to the probe ground connector. The voltage

the output of the PP-3514/U to the TS-1777/

indicated must be between 15.2 and 16.8 volts dc.

VRM-1 probe assembly, and connect the AN/

AGO 8834A