User guide

7.34 Address 46 - Programmer & Master Codes

See the Users Guide P/N 29955 for more information on Personal Identification Numbers.

7.35 Address 47 - Default EEPROM

CAUTION: Entering a [1] in Address 47 will erase all prior programming.

7.36 Address 48 - Automatic Test Report Interval

7.37 Address 49 - Hours to First Auto Test Report

• Set this value to the number of hours from the time the panel was powered up for the first report. Example: If the panel was powered

up at 2 PM and you want test reports at 3 AM, set to [0 1 3] (2 PM + 13 hours = 3 AM). If not set, the first report will be sent 12 hours

after panel power up.

7.38 Address 50 - AC Failure Report Delay

• Address 32 must be programmed for this report.

NOTE: If AC power should restore before the “AC Failure Report” time, no AC Failure Report will be sent.

7.39 Address 51 - Keypad Language Programming