User guide

DS7060 Reference Guide Copyright © 1996-97 Detection Systems, Inc. Page 15
7.11 Address 11 - Keypad Assignment
The keypad type (LED or Alpha) or no keypad must be programmed.
7.12 Address 12 thru 18 - Alpha Label
Example: To program “ABC Alarm” as the Private Label
Enter the Programmer’s Mode: [9] [8] [7] [6] [#] [0]
Enter the Program Address: [1] [2] followed by [#]
Enter: [2] for the letter “A” then press the right arrow key to continue with the next letter
Enter: [2] twice for the letter “B” then press the right arrow key for the next letter.
Enter: [2] three times for the letter “C” then press the right arrow key for the next letter.
Enter: [1] until you have a blank space (Note: Moving the cursor to the left does not create a
space. Spaces must be programmed into the Alpha using the [1] key.
Enter: [2] for the letter “A” then press the right arrow key for the next letter.
Enter: [System Reset] The “System Reset” key is the UPPER/lower case toggle.
Enter: [5] three times for the letter “l” then press the right arrow key for the next letter.
Enter: [2] for the letter “a” then press the right arrow key for the next letter.
Enter: [7] twice for the letter “r” then press the right arrow key for the next letter.
Enter: [6] for the letter “m.”
Enter: [#] Program the next address, program a different address or exit the Programmer’s Mode.