Specifications

DS7400Xi Ver. 3+ Reference Guide Copyright © 1995-96 Detection Systems, Inc. Page 57
12.35 Call-Out Timer Programming: Program Addresses (1521-1524)
Example:
To program the Remote Programmer Call-Out hour and
minute as 2:30 pm.
Hour: Data Digit 1 = [1], Data Digit 2 = [4].
Minute: Data Digit 1 = [3], Data Digit 2 = [0].
Enter the Programmer’s Mode: [9] [8] [7] [6] [#] [0]
Enter the Program Address: [1] [5] [2] [3]
Enter Data Digit 1: [1]
Enter Data Digit 2: [4]
Enter the pound key: [#] (will go to Address 1524)
Enter Data Digit 1: [3]
Enter Data Digit 2: [0]
Enter the pound key: [#]
Program the next Address, Program a different Address,
or Exit the Programmer’s Mode.
Test Report Hour
12
Default = 00 = Midnight
Address 1521
Default = 00
Address 1522
Test Report Minute
Data Digit
Call-Out Hour
Data Digit
12
Default = 00 = Midnight
Address 1523
12
Default = 00
Address 1524
Call-Out Minute
Data Digit
Data Digit
12
This section allows you to define the Hour and Minute for the Com-
municator Test Report and Remote Programmer Call-Out.
The default time for the Communicator Test Report to be sent and
for the control to call the Remote Programmer is Midnight.
12.36 Test Report and Remote Programmer Call-Out Programming: Program Address (1525)
Example:
To send Test Reports on Sundays, and to call the
Remote Programmer on Saturdays.
Data Digit 1 = [1], Data Digit 2 = [7].
Enter the Programmer’s Mode: [9] [8] [7] [6] [#] [0]
Enter the Program Address: [1] [5] [2] [5]
Enter Data Digit 1: [1]
Enter Data Digit 2: [7]
Enter the pound key: [#]
Program the next Address, Program a different
Address, or Exit the Programmer’s Mode.
Select Option
DDSelect Option
Do not call the Remote Programmer
Call the Remote Programmer on Sunday
Call the Remote Programmer on Monday
Call the Remote Programmer on Tuesday
Call the Remote Programmer on Wednesday
Call the Remote Programmer on Thursday
Call the Remote Programmer on Friday
Call the Remote Programmer on Saturday
Call the Remote Programmer every day
Call the Remote Programmer every 8 days
Call the Remote Programmer every 28 days
DD
Send a Test Report on Thursday
0Do not send a Test Report
Send a Test Report on Sunday
Send a Test Report on Monday
Send a Test Report on Tuesday
Send a Test Report on Wednes day
Send a Test Report on Friday
Send a Test Report on Saturday
Send a Test Report every 8 days
1
2
3
4
5
6
7
8
9
Send a Test Report every 28 days *0
Send a Test Report every hour *1
Send a Test Report every 12 hours *2
Send a Test Report every day
0
1
2
3
4
5
6
7
8
9
*0
12
0
Data Digit
*0 - *2 are Hex values.
They will display as A - C at the keypads.
This section allows you to define the Day and Frequency
for the Communicator Test Report and the Remote Pro-
grammer Call-Out.
If this address is not programmed, the Communicator
Test Report will not be sent and the control will not call
the Remote Programmer.