Specifications

DS7400Xi Ver. 3+ Reference Guide Copyright © 1995-96 Detection Systems, Inc. Page 50
12.27 Account Code Programming: Program Addresses (0496-0526)
Example:
To program Partition 1 Phone #1 Account Code to be 2332.
Data Digit 1 = [2], Data Digit 2 = [3], Data Digit 3 = [3], Data Digit 4 = [2].
Enter the Programmer’s Mode: [9] [8] [7] [6] [#] [0]
Enter the Program Address: [0] [4] [9] [6]
Enter Data Digit 1: [2]
Enter Data Digit 2: [3]
Enter Data Digit 1: [3]
Enter Data Digit 2: [2]
Enter the pound key: [#]
Program the next Address, Program a different Address, or Exit the Pro-
grammer’s Mode.
Data Digits
Phone #1 Account Code = Address 0500
Phone #2 Account Code = Address 0498
1234
Phone #1 Account Code = Address 0496
Phone #2 Account Code = Address 0502
Phone #1 Account Code = Address 0508
Phone #2 Account Code = Address 0506
Phone #1 Account Code = Address 0504
Phone #2 Account Code = Address 0510
The Default for all
Account Codes = 0000
Partition 1
Partition 2
Partition 3
Partition 4
Phone #1 Account Code = Address 0516
Phone #2 Account Code = Address 0514
Phone #1 Account Code = Address 0512
Phone #2 Account Code = Address 0518
Phone #1 Account Code = Address 0524
Phone #2 Account Code = Address 0522
Phone #1 Account Code = Address 0520
Phone #2 Account Code = Address 0526
Partition 5
Partition 6
Partition 7
Partition 8
Account Code programming defines the number transmitted to
the central station that identifies this panel. It also identifies
which partition is reporting from this panel.
Notes:
1. Account Codes are programmed from left to right. If programming a 3 digit Account Code, the fourth digit of the address must be “0.”
For example: If the Account Code is 121, program 1210 in the programming address.
2. If you wish to send a zero “0,” enter it as *0 (this does not apply to the added zero in a three digit Account Code).
For example: If the Account Code is 101, program 1*010 in the programming address. If the Account Code is 3050, program 3*05*0 in
the programming address.