Specifications

DS7400Xi Ver. 3+ Reference Guide Copyright © 1995-96 Detection Systems, Inc. Page 48
12.25 Report Programming: Program Addresses (0256-0304 and 0320-0340)
Keypad Fire Alarm 0256 00
Keypad Fire Restoral 0257 00
Zone Funct. 1 Alarm 0258 10
Zone Funct. 2 Alarm 0259 20
Zone Funct. 3 Alarm 0260 30
Zone Funct. 4 Alarm 0261 40
Zone Funct. 5 Alarm 0262 50
Zone Funct. 6 Alarm 0263 60
Zone Funct. 7 Alarm 0264 70
Zone Funct. 8 Alarm 0265 80
Zone Funct. 9 Alarm 0266 00
Zone Funct 10 Alarm 0267 00
Zone Funct. 11 Alarm 0268 00
Zone Funct. 12 Alarm 0269 00
Zone Funct. 13 Alarm 0270 00
Zone Funct. 14 Alarm 0271 00
Zone Funct. 15 Alarm 0272 00
Keypad Emergency 0273 00
Keypad Panic 0274 00
Zone Funct. 1 Restoral 0275 00
Zone Funct. 2 Restoral 0276 00
Zone Funct. 3 Restoral 0277 00
Zone Funct. 4 Restoral 0278 00
Zone Funct. 5 Restoral 0279 00
Default
Reporting Extended
Report Address Digit 1 Digit 2
Zone Funct. 6 Restoral 0280 00
Zone Funct. 7 Restoral 0281 00
Zone Funct. 8 Restoral 0282 00
Zone Funct. 9 Restoral 0283 00
Zone Funct. 10 Restoral 0284 00
Zone Funct. 11 Restoral 0285 00
Zone Funct. 12 Restoral 0286 00
Zone Funct. 13 Restoral 0287 00
Zone Funct. 14 Restoral 0288 00
Zone Funct. 15 Restoral 0289 00
Zone Funct. 1 Trouble 0290 00
Zone Funct. 2 Trouble 0291 00
Zone Funct. 3 Trouble 0292 00
Zone Funct. 4 Trouble 0293 00
Zone Funct. 5 Trouble 0294 00
Zone Funct. 6 Trouble 0295 00
Zone Funct. 7 Trouble 0296 00
Zone Funct. 8 Trouble 0297 00
Zone Funct. 9 Trouble 0298 00
Zone Funct. 10 Trouble 0299 00
Zone Funct. 11 Trouble 0300 00
Zone Funct. 12 Trouble 0301 00
Zone Funct. 13 Trouble 0302 00
Zone Funct. 14 Trouble 0303 00
Default
Reporting Extended
Report Address Digit 1 Digit 2
• To send the User number along with open, close, or partial close reports: place an ‘F’ (*5) in the extended digit.
• To disable a report (meaning: nothing will be sent): place a ‘0’ in the reporting digit.
• When using SIA or Contact ID format, place a ‘1’ in the reporting digit of each report you wish to enable. It is not necessary to program
the extended digit.
• For suggested values for 4/2 and BFSK format, see section 16.1-16.3. For SIA and Contact ID, the values sent are listed in section 15.2.
For other formats, consult your central station.
• HEX values: Some Data Digit values are higher than 9. These values are programmed by pressing the [*] key followed by another
number. These values will display as HEX characters when entered. The HEX character values are as follows:
*0 = A *1 = B *2 = C *3 = D *4 = E *5 = F
See Glossary (section 6.12) for further details.