Manualshelf

User Manual

ManualsBrandsDETECK ManualsOffice ElectronicsDT40P Direct Thermal Flash Receipt Printer 58mm Paper Width, Manual Cutter, 70mm/s Printing Speed, USB-B Port (No Ink Required)
12345678910
INSTALLATION AND OPERATION
Connecting the Printer
1. Connect the power adapter cable to the printer power supply and the
USB-B Port to the Printers interface
2. If your device has a Male Serial Port connection, Please use the USB-B /
Female Serial Port cable. Plug the USB-B Port into the Printers interface
and connect the Female Serial Plug into your device. This works with our
DETECK DT800 and DT600 Money Counters
3. If your device has a Lan Port connection i.e. DETECK DT200 Money
Counter, please (1) connect the Serial Port cables together as indicated in
the picture below and (2) plug the USB-B Port into the Printers interface
and (3) connect the LAN Plug into your device