Thermal Receipt Printer DT40P User Manual
Thank you for choosing our product. The FLASH DT40P Thermal Receipt Printer is the perfect solution for a safe, reliable and efficient printing quality at an affordable price.
IMPORTANT SAFETY INSTRUCTIONS WARNING - Do not touch the Printer head right after Printing to avoid any burn - Keep the machine away from heavy humidity and high temperature as it may prevent it from working properly. - Do not drop conductive objects into the machine to prevent internal short circuit. - Do not use this machine in areas where it may be exposed to water or other liquids - Unplug this machine from the wall before opening the back cover for maintenance.
SAFETY PRECAUTIONS This product should not be exposed to: - Shaky or vibrating surface - High temperature including but not limited to strong sunlight, radiator heater register. - High humidity and dust as this may damage the machine - Water or other liquids. In case of spilled liquid into the interior of the machine, please stop operating, switch off and disconnect the power cord. Contact the service center for help - Chemical solvents such as oil, gasoline, benzene and acidic liquids.
PARAMETERS Print Method Thermal Line Printer Print Print Width 48MM Parameters Resolution 384dots/Line（8dots/mm，203dpi） Printing Speed 70mm/Second Interface Type USB-B Port Line Spacing 3.75 mm（Can adjust by command） Line No. Font A:32 character /Line - Font B:42 character/Line Character Standard GB18030 simplified Character Size Font A: 1.5×3.0mm (12×24Dots） Font B：1.1×2.1mm（9×17Dots） Extended PC437/PC850/PC860/PC863/PC865/PC1252/PC86 Print Character set 6/PC852 etc.
INSTALLATION AND OPERATION Connecting the Printer 1. Connect the power adapter cable to the printer power supply and the USB-B Port to the Printers interface 2. If your device has a Male Serial Port connection, Please use the USB-B / Female Serial Port cable. Plug the USB-B Port into the Printers interface and connect the Female Serial Plug into your device. This works with our DETECK DT800 and DT600 Money Counters 3. If your device has a Lan Port connection i.e.
Loading Paper 1. Open the upper cover of the printer 2. Insert the roll paper as shown in the illustration 3. Pull out a part of paper, and close the cover as show in 3 and 4 4. Press down the flip cover and tear off the paper with the cutter Note: take care of the roll direction, if inserted in the inverse direction, the content will not print out.
Switch, Key name, Indicator and Function 1. POWER Switch The power switch is used to turn the printer On or Off 2. (FEED) Key Press the FEED button to advance paper or hold down to feed continuously 3. (STATUS) Green Light If the STATUS light is off, this indicates that the printer is in normal working state. If the STATUS light is flashing, this indicates that the printer is short of paper, print head overheating or error and other abnormal conditions. 4.
TROUBLESHOOTING Error Phenomenon Reason Corrective Action Printer Status 1.Lack of paper 1. Add Printing Paper indicator is flashing 2.Printer head is over 2.Open the cover to help heating dissipate the heat 3. Cover is not closed 3.
WARRANTY This DETECK product is warranted to be free of defects in materials and workmanship for one (1) year after the date of purchase. Please ensure you activate your warranty by visiting our website: https://deteckusa.
