Instruction manual

RXT Wireless Configuration Tool
RXT WCT Instruction Manual Rev 0.0 Page 26 of 33
Figure 34 RXT 4 Analog Sensor
Add RXT for HMI
12. Select the RXT Name field and enter “RXT 5 HMI” for the fifth RXT.
a. Enter 00.90.78 as its Unique Device ID.
b. The HMI Attached button should already be selected as the default, if not, select it since it will
function as a device with an HMI attached. This button will turn red to indicate it has been
selected.
c. Do NOT select the Alarm Station or the Battery Attached buttons in the Alarm
Stations/Battery section since it will support an HMI powered by an external source. The Low
Battery Alarm value defaults to 1 day regardless, but the field will not be used.
d. Select the Associated Zones button and select both zones 1 and 2 from the list.
e. Select the Done button to save selection and exit the Associated Zones screen.
f. Configure the alarm events and properties accordingly per section
0 if needed. In our
example, the default settings will not be changed.
g. Once the configuration of RXT 5 is complete, select the Save RXT button to save the
configuration settings for the RXT. The RXT section will increment to the next RXT to be
configured by the user.
Figure 35 RXT 5 HMI